Linksys WVC54GCA-RM User Guide - Page 29

Chapter 5 Advanced Configuration with the Web-based Utility The following fields appear on the left side of the Set Sensitivity Area window for each sensitivity area. Specify the settings as needed, then click Apply. •• Full Screen or Window 2-4 This is the name of the sensitivity area, either Full screen by default, or if Setting Custom Area is selected, Window 2, Window 3, or Window 4 (custom areas). To change a custom area name to a more appropriate name, such as Front Door, enter the new name in this field. •• Setting Custom Area To specify custom area(s) within the full screen, check this box, then configure up to three custom sensitivity areas. By default only one area, Window 2, is selected. To create an additional area, check the box next to its name. You can move or resize each area as needed. Custom areas may also overlap. •• Threshold Slide this to the left to reduce the area's sensitivity, or to the right to increase sensitivity. New Motion Trigger Schedule This section allows you to create a schedule that determines when motion detection will be active. To do this, you define one or more "trigger" events, or periods during which motion detection will be in effect. For each trigger event, fill in the following fields. Trigger Motion Detection Specify how often this trigger event occurs: Every day, Weekdays (Mon - Fri), or on specific days of the week (Sunday to Saturday). Start Time and End Time Select the starting and ending times for the event. Add Click Add to add the new event to the schedule. Clear Click Clear to clear the schedule of all events. Delete To delete an event from the Schedule List, select the event, then click Delete. Schedule List This displays all of the scheduled trigger events that you have defined and saved. It is empty by default. To save your changes, click Apply. To cancel any unsaved changes, click Cancel. To get additional information about the screen's features, click Help. Setup > Status The Setup > Status screen allows you to view the Camera's status information and log. Setup > Status Screen System Status Firmware Version The version of the currently installed firmware. MAC Address The MAC Address of the Camera. Camera Name The name you gave to the Camera. Description Information about the Camera, such as location. Date/Time The current date and time. Network Network Type The wireless network's mode. IP Address The Camera's IP Address. Subnet Mask The Camera's Subnet Mask. Gateway The Camera's Gateway address. Wireless SSID The wireless network's SSID or name. Channel No The wireless network's channel setting. Security The wireless network's encryption level. Log System Log This shows the Camera's activities. To empty the log, click Clear Log. To get the Camera's most up-to-date information, click Refresh. To get additional information about the screen's features, click Help. Wireless-G Internet Home Monitoring Camera 28