Lowrance Elite-12 Ti Operator Manual EN - Page 23
Creating a Man Overboard waypoint, Cancel navigation to MOB, Display MOB waypoint information
View all Lowrance Elite-12 Ti manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
- The measuring icons appear with a line drawn from the vessel center to the cursor position, and the distance is listed in the cursor information window. 2. You can reposition the measuring points by dragging either icon as long as the measuring function is active Ú Note: The bearing is always measured from the grey icon to the blue icon. You can also start the measuring function without an active cursor. Both measuring icons are then initially located at the vessel position. The grey icon follows the vessel as the vessel moves, while the blue icon remains at the position given when you activated the function. You terminate the measuring function by selecting the Finish measuring menu option. Creating a Man Overboard waypoint If an emergency situation should occur, you can save a Man Overboard (MOB) waypoint at the vessel's current position by pressing the Zoom In (+) and Zoom out (-) keys simultaneously. When you activate the MOB function the following actions are automatically performed: • a MOB waypoint is created at the vessel's position • the display switches to a zoomed chart panel, centered on the vessel's position • the system displays navigation information back to the MOB waypoint Multiple MOB waypoints are saved by repeatedly pressing the MOB buttons. The vessel continues to show navigation information to the initial MOB waypoint. Navigation to subsequent MOB waypoints needs to be done manually. Cancel navigation to MOB The system continues to display navigational information towards the MOB waypoint until you cancel the navigation from the menu. Display MOB waypoint information You can display MOB information by selecting the MOB waypoint and then the MOB waypoint pop-up. Basic operation | ELITE Ti Operator Manual 23