Lowrance Elite-12 Ti178 US Inland No Transducer Elite Ti2 Installation Manual - Page 17

U-bracket mounting, drill pilot holes. Use fasteners suited to the mounting surface

Get Lowrance Elite-12 Ti178 US Inland No Transducer PDF manuals and user guides View all Lowrance Elite-12 Ti178 US Inland No Transducer manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

U-bracket mounting 1. Place the bracket in the desired mounting location. Ensure that the chosen location has enough height to accommodate the unit fitted in the bracket, and allows tilting of the unit. Also adequate space is required on both sides to allow tightening and loosening of the knobs. 2. Mark the screw locations using the bracket as a template, and drill pilot holes. Use fasteners suited to the mounting surface material. 3. Screw down the bracket. 4. Mount the unit to the bracket using the knobs. Hand tighten only. Installation | ELITE Ti² Installation Manual 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
U-bracket mounting
1.
Place the bracket in the desired mounting location. Ensure that
the chosen location has enough height to accommodate the
unit fitted in the bracket, and allows tilting of the unit. Also
adequate space is required on both sides to allow tightening
and loosening of the knobs.
2.
Mark the screw locations using the bracket as a template, and
drill pilot holes. Use fasteners suited to the mounting surface
material.
3.
Screw down the bracket.
4.
Mount the unit to the bracket using the knobs. Hand tighten
only.
Installation
| ELITE Ti² Installation Manual
17