Lowrance Elite-12 Ti178 US Inland No Transducer Elite Ti2 Installation Manual - Page 30

Use temp data from, Installation, For depth below transducer, set the offset to 0.

Get Lowrance Elite-12 Ti178 US Inland No Transducer PDF manuals and user guides View all Lowrance Elite-12 Ti178 US Inland No Transducer manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

distance from the transducer to the lowest point of the boat in the water or from the transducer to the water surface. B A • To show the depth from the lowest point of the vessel to the bottom, set the offset equal to the vertical distance between the transducer and the lowest part of the vessel, A (negative value). • To show the depth from the water surface to the bottom, set the offset equal to the vertical distance between the transducer and the water surface, B (positive value) • For depth below transducer, set the offset to 0. Use temp data from Selects from which source the temperature data is shared on the NMEA 2000 network. Installation Use this dialog to setup and configure available sources. 30 Software setup | ELITE Ti² Installation Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
distance from the transducer to the lowest point of the boat in the
water or from the transducer to the water surface.
A
B
•
To show the depth from the lowest point of the vessel to the
bottom, set the offset equal to the vertical distance between the
transducer and the lowest part of the vessel,
A
(negative value).
•
To show the depth from the water surface to the bottom, set the
offset equal to the vertical distance between the transducer and
the water surface,
B
(positive value)
•
For depth below transducer, set the offset to 0.
Use temp data from
Selects from which source the temperature data is shared on the
NMEA 2000 network.
Installation
Use this dialog to setup and configure available sources.
30
Software setup
| ELITE Ti² Installation Manual