Lowrance HDS-12 Gen2 Touch Operation Manual - Page 67
Scanning Fishing areas - hds 12 gen 2 touch
View all Lowrance HDS-12 Gen2 Touch manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Sharing files After structure sonar log (.sl2) files are converted to StructureMap (.smf ) files, they can be saved to a SD card and used on other GPS capable HDS Gen 2 units without the need for the StructureScan module. Show StructureMap (.smf) files You can view StructureMap (.smf ) files from the Files menu, which allows you to quickly see what area each StructureMap file covers. Scanning Fishing areas With the Structure Source set to the default Live mode, steer the boat over the desired location to scan the area. When conducting a side-by-side scan of an area, you will get a cleaner scan if you do not overlap history trails and you turn off auto ranging on the SideScan. ¼¼ NOTE: Optimal speed for viewing or logging StructureMap data is between 2-8 mph (3-12 kmh). Live mode is disabled for speeds greater than 10 mph. Scanning tips • To get a picture of taller structure (a wreck, etc) - don't drive over it. Steer the boat so the structure will be on the left or right side of your boat. • Set your structure range to a significantly greater level (two-tothree times) than the water depth to ensure a complete scan and to maximize conversion accuracy. StructureMap | Lowrance HDS Gen2 Touch | 65