Lowrance HDS-7 Gen3 Operators Manual US

Lowrance HDS-7 Gen3 Manual

Get Lowrance HDS-7 Gen3 PDF manuals and user guides View all Lowrance HDS-7 Gen3 manuals
Add to My Manuals
Save this manual to your list of manuals

Lowrance HDS-7 Gen3 manual content summary:

  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 1
    HDS Gen3 Operator Manual ENGLISH lowrance.com
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 2
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 3
    THE LAW. Governing Language: This statement, any instruction manuals, user guides and other information relating to the product (Documentation) to make changes to specifications without notice. Trademarks Lowrance® and Navico® are registered trademarks of Navico. | HDS Gen3 Operator Manual 3
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 4
    R&TTE directive 1999/5/EC • The requirements of level 2 devices of the Radiocommunications (Electromagnetic Compatibility) standard 2008 The relevant Declaration of conformity is available in the HDS Gen3 section on the following website: lowrance.com. 4 Preface | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 5
    and/or damage to equipment/ personnel. Manual version This manual is written for the HDS Gen3 software version 1.0. The manual is continuously updated to match new software releases. The latest available manual version can be downloaded from lowrance.com. Preface | HDS Gen3 Operator Manual 5
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 6
    Viewing the manual on the screen The pdf viewer included in the HDS Gen3 makes it possible to read the manuals and other pdf files on the screen. Manuals can be downloaded from lowrance.com. The manuals can be read from an inserted microSD card or copied to the unit's internal memory. Use the menu
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 7
    Out Exit the pdf viewer Select the relevant panel button. Touch operation: Use pinch or spread gestures. Key operation: Use the + and - keys. Touch operation: Select the X in the upper right corner of your software, refer to "Software upgrades" on page 150. Preface | HDS Gen3 Operator Manual 7
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 8
    8 Preface | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 9
    pages and panels 26 Using the cursor on the panel 28 Creating a Man Overboard waypoint 29 Screen capture 30 Customizing your system 30 Customizing the Home page wallpaper 30 Adjusting panel size 31 Creating routes 37 Find objects on chart panels 38 3D charts Contents | HDS Gen3 Operator Manual 9
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 10
    39 Chart overlay 39 Insight specific chart options 40 Insight view options 41 Navionics specific chart options 42 Navionics chart settings 43 Navionics view options the StructureScan panel 78 Viewing StructureScan history 78 Setting up the StructureScan image 10 Contents | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 11
    Advanced StructureScan settings 81 SpotlightScan 81 The SpotlightScan image 82 SpotlightScan setup 83 SpotlightScan options 85 SpotlightScan operation tips 86 StructureMap 86 The StructureMap image Autopilot control of the trolling motor 104 Autopilot settings Contents | HDS Gen3 Operator Manual 11
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 12
    controls 129 Device explorer 130 Audio options 130 Audio mixer 130 Auxiliary sources 131 Radio 133 DVD video 134 SiriusXM™ weather 134 Sirius status panel 12 Contents | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 13
    Weather alarms 140 Tools 140 Waypoints/routes/trails 140 Tides 140 Alarms 140 Settings 143 Vessels 144 Sun/Moon 144 Trip calculator 144 Files 144 Find 145 Alarms 145 Alarm system 145 Type of messages 150 Backing up your system data 154 Touchscreen operation Contents | HDS Gen3 Operator Manual 13
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 14
    14 Contents | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 15
    Operating the system You can use both the keys and the touchscreen to operate the HDS Gen3. This manual uses the following general terminology to describe operating the unit. Term Select Press and hold Drag Touch Key Tap the panel Use the cursor keys to select, then confirm by pressing the
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 16
    , to return to previous menu level, and to remove the cursor from the panel. 6 Enter key Press to select or save your settings. 16 Introduction | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 17
    the System Controls dialog. Repeat short presses to cycle the backlight brightness. Press and hold to turn the unit ON/OFF. 11 Card reader door 12 microSD Card readers Introduction | HDS Gen3 Operator Manual 17
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 18
    pre-configured split page options for the application. 4 Close button Select to exit the Home page and return to the previous active page. 18 Introduction | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 19
    a short press on the Power key. 4 Dialog Information to or input from the user. 5 Alarm message Displayed if dangerous situations or system faults occur. Introduction | HDS Gen3 Operator Manual 19
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 20
    be adjusted from the System Controls dialog. Quick split pages Each full screen application has several pre-configured quick split pages, featuring the selected of 12 favorite pages. For more information, refer to "Adding new favorite pages" on page 32. 20 Introduction | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 21
    menus and dialogs as on other panels. This manual does not include specific operation instructions for any 3rd party device. For features and the network. A separate manual is provided with your CZone system. Refer to this documentation and to the HDS Gen3 Installation manual for how to install and
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 22
    is controlled from the wireless device by Apps downloaded from their relevant Application store. Configuration and setup are described in the HDS Gen3 Installation manual. When remote control is accepted, the active page is mirrored to the wireless device. Ú Note: For safety reasons, Autopilot and
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 23
    from the System Controls dialog. If the Power key is released before the shut-down is completed, the power off process is cancelled. Basic operation | HDS Gen3 Operator Manual 23
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 24
    false touchscreen activation the touchscreen will automatically lock when it detects a significant amount of water on the screen. You lock the touchscreen from the System Controls dialog. You remove the lock function by a short press on the Power key. 24 Basic operation | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 25
    to the previous menu level, and then exit. Page menus can be hidden to allow pages to be a full screen view. To hide the menu, drag the menu to the right, or press and hold the Menu key. When in the dialog's upper right corner or by pressing the X key. Basic operation | HDS Gen3 Operator Manual 25
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 26
    panel. You activate a panel by: • Touch operation: tapping the panel • Key operation: pressing covering details with your finger. Press and hold your finger on the screen to switch the cursor symbol to a selection circle, appearing above your finger. 26 Basic operation | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 27
    over the desired item to display item information. When you remove your finger from the screen the cursor reverts to normal cursor operation. Measuring distance The cursor can be used to function by selecting the Finish measuring menu option. Basic operation | HDS Gen3 Operator Manual 27
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 28
    to the initial MOB waypoint. Navigation to subsequent MOB waypoints needs to be done manually. Cancel navigation to MOB The system continues to display navigational information towards the MOB waypoint MOB waypoint and then the MOB waypoint pop-up. 28 Basic operation | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 29
    menu option the Edit Waypoint dialog opens. Screen capture Simultaneously press and hold the Pages and Power keys to take a screen capture. By default, screen captures are saved to internal memory. Refer to "Tools" on page 140 for how to view files. Basic operation | HDS Gen3 Operator Manual 29
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 30
    pages and for predefined split pages. 1. Activate the System Controls dialog 2. Select the adjust splits option in the dialog 3. Adjust the panel size by: - Touch operation: dragging the adjustment icon - Key operation: using the cursor keys to move the adjustment icon 30 Customizing your system
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 31
    data. • Configure a selected data overlay appearance (digital or analog, size, and so on). • Re-locate an item by selecting and moving it. Customizing your system | HDS Gen3 Operator Manual 31
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 32
    dialog 2. Add or remove panels in the page editor dialog. 3. Save or discard your changes to leave the favorite edit mode. 32 Customizing your system | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 33
    . The Chart panel Key Description 1 Waypoint* 2 Vessel with Heading extension line (Heading extension line is optional) 3 Route* 4 North indicator 5 Grid lines* 6 Range rings* 7 Trail* Charts | HDS Gen3 Operator Manual 33
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 34
    region. All units support Insight charts from Navico including Insight Genesis. The system also supports Navionics Gold, Platinum+ , c-map.jeppesen.com or navionics.com. Ú Note: Insight charts are referred to as Lowrance in the menu. Charts on microSD cards are shared over | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 35
    chart panel. Panning the chart You can move the chart in any direction by: • Touch operation: dragging your finger on the screen • Key operation: using the cursor keys to move the cursor to the edge of panel. This also centers the chart to the vessel position. Charts | HDS Gen3 Operator Manual 35
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 36
    is used until navigation is started. Look ahead Moves the vessel icon closer to the bottom of the screen so that you can maximize your view ahead. Displaying information about chart items When you select a in chart settings to see basic item information. 36 Charts | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 37
    on the panel to search from the cursor position. If the cursor is not active, the system searches for items from the vessel's position. Charts | HDS Gen3 Operator Manual 37
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 38
    land and sea contours. Ú Note: All chart types work in 3D mode, but without 3D cartography for the appropriate area the chart appears flat. When 3D chart option is selected, the Pan and the Rotate icons appear the vessel on the chart panel" on page 36. 38 Charts | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 39
    Orientation, Look ahead, 3D and Change to Navionics/ Change to Insight (previously described in this section) are common for all chart types. Chart imagery style The charts can be displayed in three imagery styles. 2D mapping style Shaded relief No contours Charts | HDS Gen3 Operator Manual 39
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 40
    information for the chart in use Insight chart categories Insight charts include several categories and sub- 3D mode only. Exaggeration is a multiplier applied to the drawn height of hills on land, and troughs in water to make them look taller or deeper. 40 Charts | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 41
    Navionics specific chart options Orientation, Look ahead, 3D and Change to Navionics/ Change to Insight (previously described in this section) are common for all chart types. information included with your chart, or to Navionics website: www.navionics.com. Charts | HDS Gen3 Operator Manual 41
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 42
    a given depth. This helps you to declutter charts in areas where there are many rocks located at depths well below your vessel's draught. 42 Charts | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 43
    value of the evaluated day. The red arrow is used when tide is rising, and the blue arrow is used when tide is falling. Charts | HDS Gen3 Operator Manual 43
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 44
    certain regions, and Navionics cartography version. You can view photo overlays in either 2D or 3D modes. No Photo overlay Photo overlay, land only Full Photo overlay Photo transparency The Photo by the photo. Minimum transparency Maximum transparency 44 Charts | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 45
    Navionics Fish N' Chip The system supports Navionics Fish N' Chip (U.S. only) chart feature. For more the nearest available contour line. No Depth highlight range Depth highlight range: 6 m - 12 m Shallow water highlight Highlights areas of shallow water. This allows you to highlight areas of
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 46
    location. If there is no current (0 knots) this will be shown as a white, square icon. Static Current and Tide icons Dynamic Current icons 46 Charts | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 47
    not available in Insight units, or in any unit used in U.S. territorial waters. Range Rings The range rings can be used to present the distance from your vessel to other chart objects. The range scale is set automatically by the system to suit the chart scale. Charts | HDS Gen3 Operator Manual 47
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 48
    the active GPS sensor. Synchronize 2D/3D chart Links the position shown on one chart with the position shown on the chart. Hide chart If the option is set to ON when viewing a Lowrance chart, the chart (background) is not displayed and only the vessel, extensions, 48 Charts | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 49
    exact position with latitude and longitude coordinates. A waypoint positioned from the Sonar image has a depth value, in addition to position information. Waypoints, Routes, and Trails | HDS Gen3 Operator Manual 49
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 50
    option 4. Select the new waypoint position 5. Press the Enter key to confirm the new position. The waypoint is now automatically saved at the new position. 50 Waypoints, Routes, and Trails | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 51
    routepoints on the chart panel until the route is completed. 5. Save the route by selecting the save option in the menu. Waypoints, Routes, and Trails | HDS Gen3 Operator Manual 51
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 52
    combining existing waypoints from the Routes dialog. The dialog is activated by using the Routes tool on the Home page. 52 Waypoints, Routes, and Trails | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 53
    displayed if the information is missing when you start the feature. Ú Note: HDS Gen3 units designed for sale in the U.S. region do not have Autorouting or Easy Routing capabilities. Autorouting or .com, cmap.jeppesen.com or navionics.com. Waypoints, Routes, and Trails | HDS Gen3 Operator Manual 53
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 54
    the first and the last routepoint of the open route. - Selection if you want to manually select the routepoints that define the limits for the autorouting, then select the relevant routepoints. routepoint Result after automatic routing 54 Waypoints, Routes, and Trails | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 55
    's pop-up or from the menu. The dialog can also be accessed by using the Routes tool on the Home page. Waypoints, Routes, and Trails | HDS Gen3 Operator Manual 55
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 56
    a course change is registered. Ú Note: The Trails option must also be turned ON in the chart settings to be visible. 56 Waypoints, Routes, and Trails | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 57
    Waypoints, Routes, and Trails | HDS Gen3 Operator Manual 57
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 58
    , either as a full page panel or as part of a multiple panel page. Key Description 1 Data fields 2 Vessel heading 3 Bearing to waypoint 4 Destination point 58 Navigating | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 59
    Goto Cursor option in the menu. Navigate a route You can start navigating a route from the chart panel, steer panel, or from the Route dialog. Navigating | HDS Gen3 Operator Manual 59
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 60
    page • Selecting the route details from the menu Cancel navigation When you are navigating, the menu includes an option for cancelling the navigation. 60 Navigating | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 61
    selected route, if the vessel goes beyond this limit, an alarm is activated. XTE alarm (Cross track error) Turns on/off the XTE alarm. Navigating | HDS Gen3 Operator Manual 61
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 62
    and position panel. The graphic example shows a cursor position window with Loran position information. For more information refer to your Loran system documentation. 62 Navigating | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 63
    graph* 4 Depth at cursor 5 Amplitude scope* 6 Zoom (range) buttons 7 Water depth and Water temperature at cursor location 8 Range scale 9 Bottom * Optional Sonar image items. Sonar | HDS Gen3 Operator Manual 63
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 64
    the cursor is not shown on the Sonar image. When you position the cursor on the Sonar image; the screen pauses, the depth at the cursor position is shown, and the information window and the history bar are in relation to the total Sonar image history stored. 64 Sonar | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 65
    latest soundings. If you position the cursor to the left side of the screen, the history bar starts scrolling towards the left, and the automatic scrolling The range The range setting determines the water depth that is visible on the screen. Auto range By default, the range is set to Auto. With Auto
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 66
    : Setting a custom range puts the sonar in manual mode. If the bottom is well beyond the lower range set, you may lose digital depth. Sonar frequency The HDS Gen3 unit supports several transducer frequencies. Available frequencies depend on the transducer model that is connected. You can view two
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 67
    rejection option filters the signal interference and reduces the on-screen clutter. Surface clarity Wave action, boat wakes, and temperature You can select the scrolling speed of the Sonar image on the screen. A high scroll speed updates the image fast, while a low scroll speed presents a longer
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 68
    depth is out of transducer range. When the unit is in manual mode, you might not receive any depth readings, or you might receive incorrect depth information. Recording Sonar data You can record Sonar and StructureScan data and save the file internally in the HDS Gen3
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 69
    corner and a message will appear periodically at the bottom of the screen. The recording is stopped by selecting the Log Sonar function and data Both internally and externally stored sounder records may be reviewed when selected. The log file is displayed as a paused | HDS Gen3 Operator Manual 69
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 70
    Sonar view options Select the View in the Sonar menu to see View options. Split screen options Zoom Key Description 1 Zoom level 2 Zoom bars The Zoom mode presents a magnified view of range is reduced. You see this as reduced distance between the zoom bars. 70 Sonar | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 71
    image. Depth line A depth line can be added to the bottom surface to make it easier to distinguish the bottom from fish and structures. Sonar | HDS Gen3 Operator Manual 71
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 72
    You can have all available sonar history shown at the top of the sonar screen. The Preview bar is a snapshot of available sonar history. You can scroll active. Fish ID You can select how you want the echoes to appear on the screen. You can also select if you want to be notified by a beep when a
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 73
    more information about how to setup Sonar, refer to the separate HDS Gen3 Installation manual. Overlay downscan When a StructureScan unit is connected to your menu to adjust the level of structure overlay shown on the screen. You can make adjustments using the Overlay slider bar. Fishing mode
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 74
    select which channel to display. You exit the view function by selecting the X in the upper right corner or by pressing the X key. 74 Sonar | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 75
    Installation Used for Sonar installation and setup. See the separate HDS Gen3 Installation manual. Sonar | HDS Gen3 Operator Manual 75
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 76
    -like image of the seabed. Ú Note: You must have a StructureScan HD transducer installed to use StructureScan features. StructureScan HD provides a 328 m (600 ft) wide coverage in high detail with be added as an overlay to the traditional Sonar image. 76 StructureScan | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 77
    or -) buttons • pinching or spreading on the screen • using the +/- keys Zoom level is shown on the cursor on a DownScan image; the screen pauses, the cursor information window and the you position the cursor on a SideScan image; the screen pauses, and the cursor information window is activated.
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 78
    cursor is active, some options in the menu are replaced with cursor mode features. Select Clear cursor to return to the normal menu. 78 StructureScan | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 79
    , left only, right only, or left/right side scanning. Stop sonar Use the Stop sonar menu option when you want to turn off the StructureScan transducer, but not turn off the unit. StructureScan | HDS Gen3 Operator Manual 79
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 80
    always shown at the top of the screen, or have it appear only when the cursor is active. By default, the sonar history preview appears when the cursor is active. Recording StructureScan data You can Log sonar data and save the file internally in the HDS Gen3 unit, or onto a microSD card as
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 81
    broadband/ CHIRP transducer. The SpotlightScan transducer works with most MotorGuide and Minn Kota cable steer trolling motors. Its scanning speed is controlled by how fast the trolling motor is rotated with the foot pedal. The SpotlightScan image SpotlightScan | HDS Gen3 Operator Manual 81
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 82
    to view SpotlightScan, broadband sonar, and Downscan images at the same time. You cannot view SpotlightScan and SideScan images at the same time. 82 SpotlightScan | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 83
    top of the display. Ú Note: The "V" on the Structure display represents the beams of the SpotlightScan transducer. The wide end of the "V" should be aligned in the direction the trolling motor is pointing. Ú surface. The surface clarity option reduces SpotlightScan | HDS Gen3 Operator Manual 83
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 84
    pumps, engine vibration and air bubbles can clutter the sonar screen. The noise rejection option filters the signal interference and reduces on-screen clutter. Log sonar You can Log sonar data and save the file internally in the HDS Gen3 unit, or onto a microSD card as described in "Recording Sonar
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 85
    achieve the best results. • Reducing the range increases the size of the water column, providing the best view of fish activity beneath the boat. SpotlightScan | HDS Gen3 Operator Manual 85
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 86
    have a Structure overlay: • Touch operation: zoom the chart and the scanned image by using the zoom (+ or -) buttons, or by pinching or spreading on the screen. Drag on the panel to to appear on the chart screen as soon as Structure overlay is enabled 86 StructureMap | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 87
    When increasing the search range, the ping speed of the StructureScan transducer is reduced, but the width and the length of the image enough to show Structure details. Saved mode is used to review and examine StructureMap files, and to position the vessel on specific HDS Gen3 Operator Manual 87
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 88
    recorded, there is a flashing red symbol and a message appears periodically at the bottom of the screen. Ú Note: The message includes information about file size. Keep the size of your logs to from the recording dialog, or from the files browser. 88 StructureMap | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 89
    full chart capability and can be used with embedded cartography as well as Navionics, Insight and other third-party charting cards compatible with the system. When using StructureMap with keeping copies of StructureMap files on external microSD cards. StructureMap | HDS Gen3 Operator Manual 89
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 90
    ratio between light and dark areas of the screen. Water column Shows/hides the water column in be affected by the water depth. Frequency Sets the transducer frequency used by the unit. 800 kHz offers the best existing live history data from the screen and begins showing only the most current
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 91
    . All edit options are available from the Info panel menu. Available editing options depends on which data sources are connected to your system. Info panels | HDS Gen3 Operator Manual 91
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 92
    displayed, configure limits, and eventually change the source for the information. 5. Save your changes by selecting the save option in the menu. 92 Info panels | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 93
    input channel. Video standard HDS Gen3 supports NTSC and PAL video. Check the local video standard or the standard of your cameras. Adjusting the video image You can optimize the video display by adjusting the video image settings. Default for all settings: 50%. Video | HDS Gen3 Operator Manual 93
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 94
    a time-out period, demo mode resumes and any changed settings are restored to default. Ú Note: Demo mode is designed for retail/showroom demonstrations. 94 Simulator | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 95
    simulator. Advanced simulator settings The Advanced simulator settings allows for manually controlling the simulator. GPS source Selects where the GPS data is generated from. Speed, Course and Route Used for manually entering values when GPS source is set to Simulated course or
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 96
    Set start position Moves your vessel to the current cursor position. Ú Note: This option is only available when the GPS source is set to Simulated course. 96 Simulator | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 97
    Lowrance SmartSteer interface. If an update is necessary, a Trolling motor update dialog appears on your networked HDS unit(s). The update process is initiated through an HDS unit. Follow the onscreen instructions to update or the System Controls dialog. Autopilot | HDS Gen3 Operator Manual 97
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 98
    by using the Page Editor to make a Favorite page. For information about Favorite pages, refer to "Adding new favorite pages" on page 32. 98 Autopilot | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 99
    your vessel arrives at a selected waypoint. Enables anchor mode when your vessel arrives at the cursor position. Enables anchor mode at your current location. Autopilot | HDS Gen3 Operator Manual 99
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 100
    accuracy may result in incomplete navigation of the turn pattern. U-turn Changes the current set heading to be 180° in the opposite direction. 100 Autopilot | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 101
    C-turn Steers the vessel in a C-shaped pattern. Spiral turn Steers the vessel in a spiral with a decreasing or increasing radius. Spiral decreasing radius Zigzag turns Steers the vessel in a zigzag pattern. Spiral increasing radius Autopilot | HDS Gen3 Operator Manual 101
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 102
    along a pre-defined route. The position information from the GPS is used to keep the boat on the track line towards the destination point. Autopilot | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 103
    Spd up (+) and Spd down (-) buttons, or by selecting the Set Spd or Set prop option and entering your desired speed or propeller rate. Autopilot | HDS Gen3 Operator Manual 103
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 104
    reaches the destination. Ú Note: Before starting a navigation mode or a turn pattern, it is important to select an arrival mode that fits your navigation needs. Autopilot | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 105
    points are synced with the Xi5 trolling motor. If any anchor points are stored in the motor, they appear in the anchor points list. Autopilot | HDS Gen3 Operator Manual 105
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 106
    15 Radar The radar panel can be set up as a full screen view or combined with other panels. The radar image can also be displayed as an Orientation 2 Range 3 Heading line* 4 Cursor 5 Compass* 6 Cursor position window 7 Range rings* 8 Range markers* Radar | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 107
    from the Chart panel's menu. Radar operational modes The radar's operational modes are controlled from the HDS Gen3 unit. The following modes are available: Off The power to the radar scanner is turned off from the panel, select Clear cursor or press the X key. Radar | HDS Gen3 Operator Manual 107
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 108
    a manual and an automatic mode. You toggle between automatic and manual mode screen clutter caused by the echoes of waves is reduced. The system includes predefined Sea clutter settings for harbor and offshore conditions, in addition to the manual Sea clutter value in manual mode. Rain clutter Rain
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 109
    vessel. It compensates for distance to the radar object, making returns from equal sized objects appear with the same size on the radar image. Radar | HDS Gen3 Operator Manual 109
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 110
    up Rotates the radar image with the north direction upwards. Course up Rotates the radar image to display the current navigation course directly up. Radar | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 111
    2. Move the cursor to where you want to position the radar center 3. Confirm the setting by selecting the save offset option in the menu. Radar | HDS Gen3 Operator Manual 111
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 112
    save option in the menu to save your settings Placing EBL/VRM markers by using the cursor 1. Position the cursor on the radar image Radar | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 113
    when a radar target breaches the guard zone limits. You can select if the alarm is activated when the target enters or exits the zone. Radar | HDS Gen3 Operator Manual 113
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 114
    tool for collision avoidance. Ú Note: MARPA requires heading data for both the radar and the HDS Gen3. MARPA target symbols The system uses the target symbols shown below. Symbol Description Acquiring MARPA target default target symbol when the cursor is removed. Radar | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 115
    You can define the following MARPA alarms: Alarm ID MARPA target lost Description Controls whether an alarm is activated when a MARPA target is lost Radar | HDS Gen3 Operator Manual 115
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 116
    , refer to Marpa settings under "Radar settings" on page 116. Recording radar data You can record radar data and save the file internally in the HDS Gen3 unit, or save it onto a microSD card inserted into the unit's card reader. A recorded radar file can be used for documenting an event or an
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 117
    125. An alarm triggers if a vessel is tracking into your safe zone. Installation The Installation option is used for radar installation, described in the separate HDS Gen3 Installation manual. Radar | HDS Gen3 Operator Manual 117
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 118
    , illustrated with bold line. A target is defined as dangerous based on the CPA and TCPA settings. Refer to "Defining dangerous vessels" on page 125. AIS | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 119
    is displayed. You can display detailed information for a target by selecting the AIS pop-up, or from the menu when the target is selected. AIS | HDS Gen3 Operator Manual 119
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 120
    coded to indicate target status. Calling an AIS vessel If the system includes a VHF radio supporting DSC (Digital Select Calling) calls over NMEA 2000, you can initiate a DSC call to other vessels from the HDS Gen3. The call option is available in the AIS Vessel Details dialog, and in the Vessel
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 121
    2. Save the waypoint - The waypoint is saved to your waypoint list. This waypoint name is prefixed with MOB AIS SART - followed by the unique AIS | HDS Gen3 Operator Manual 121
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 122
    stops receiving the AIS SART message, the AIS SART remains in the Vessels list for 10 minutes after it receives the last signal. 122 AIS | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 123
    a vessel is dangerous regardless of the enabled/disabled state. Controls whether an alarm will be activated when a message is received from an AIS target AIS | HDS Gen3 Operator Manual 123
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 124
    settings Your vessel's MMSI number You need to have your own MMSI (Maritime Mobile Service Identity) number entered in the system to receive addressed messages from AIS and DSC vessels the alarm settings must be toggled on for any MMSI message to be displayed. 124 AIS | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 125
    a target comes within this distance, the symbol changes to the "dangerous" target symbol. An alarm is triggered if activated in the Alarm settings panel. AIS | HDS Gen3 Operator Manual 125
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 126
    more information refer to www.siriusXM.com. Before you can start using your audio equipment, it must be installed according to the HDS Gen3 Installation manual and to the documentation included with the audio device. Enabling audio A compatible audio device connected to the NMEA 2000 network should
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 127
    . The Media bar When audio is enabled, the Media bar appears at the bottom of the screen on all pages. The information in the Media bar varies depending on the active audio source. Select shown only when repeat is on 5 Shuffle - shown only when shuffle is on Audio | HDS Gen3 Operator Manual 127
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 128
    the audio system. Volume Master volume control By default the volume for all speaker zones are adjusted when you adjust the master volume. 128 Audio | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 129
    options to access the source's native menu or file structure, which can be used to select tracks. An example of an USB Device explorer: Audio | HDS Gen3 Operator Manual 129
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 130
    : 130 Auxiliary sources AUX and AUX 2 (labeled AUX and SAT IN on the SonicHub) can be used for Sirius radio and external audio devices that support RCA connectivity. Sirius radio playback can be controlled when a Audio | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 131
    Lowrance weather module is connected to SAT IN. Other auxiliary audio sources only have volume control. Detaching Sirius from the AUX source region Before playing FM or AM radio, and using a VHF radio, you must select the appropriate region for your location. Audio | HDS Gen3 Operator Manual 131
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 132
    selected Sirius channels from being broadcasted. A 4digit-code must be entered to lock channels and the same code entered to unlock the channels. 132 Audio | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 133
    Audio panel and select DVD as the source on the menu. 4. Select the Control menu option. 5. Use the menu options to control the playback. Audio | HDS Gen3 Operator Manual 133
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 134
    audio and Sirius™ Marine Weather Service on your system (North America only). Sirius™ audio and weather service covers inland U.S. waters and coastal ). It also includes antenna status, service level, and the electronic serial number for the weather module. 134 SiriusXM™ | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 135
    relative wind direction, with the tail showing the direction the wind is coming from. In the graphics below, the wind comes from the northwest. SiriusXM™ | HDS Gen3 Operator Manual 135
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 136
    wind tail. Zero knots / Indeterminate wind direction Small barb = 5 knots Large barb = 10 knots Arrow barb = 50 knots If a combination of 5 and 10 knot barbs are shown on a tail, then add them together to give the menu when the weather icon is selected. 136 SiriusXM™ | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 137
    icons are available to show current or predicted weather conditions. You can select an icon to display detailed weather information. Icon Description City forecast SiriusXM™ | HDS Gen3 Operator Manual 137
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 138
    (yellow) Storm attributes Lightning Watch box location and warning Marine zone location Marine zones Sirius™ service includes access to weather reports for all U.S. Marine Zones, with the exception of the high entire Atlantic and the Eastern Pacific. 138 SiriusXM™ | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 139
    minimum value are not color coded. Animating Sirius weather graphics The HDS Gen3 records the weather information you have turned on, and this marine zone. A watchbox is defined by the National Weather Service. When the alarm for watchbox is turned on, an alarm occurs when your vessel
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 140
    options and tools that are not specific to any panel. When external equipment is integrated to the HDS Gen3, new icons might be added to the Tools panel. These icons are used for accessing the System settings The system settings provides access to the following: 140 Tools | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 141
    bearings. When set to Auto, the system automatically converts magnetic north to true north. Select manual mode if you need to enter your own local magnetic variation. Satellites Status page for active are to be restored to their original factory settings. Tools | HDS Gen3 Operator Manual 141
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 142
    , and fuel used per season. In addition, it provides access to configuration engine and tanks, and calibration of tanks (refuel) dialogs. Refer to the Installation Manual. Tools | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 143
    information about using this panel, refer to "Vessel settings" on page 124. Simulator Provides for manually controlling the simulator. For more information, refer to "Simulator" on page 94. Vessels Status listing received from other AIS vessels with time stamp. Tools | HDS Gen3 Operator Manual 143
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 144
    Sun card You can copy screen captures and logs to covered in the section "Maintenance" on page 149. Find Search function for items by categories: waypoints, routes, trails, fuel prices, chart items, vessel's AIS status and vessel's messages, and coordinates. 144 Tools | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 145
    faults while the system is running. When an alarm situation occurs, an alarm message pops up on the screen. If you have enabled the siren, the alarm message is followed by an audible alarm, and the switch the alarm as the title, and with details for the alarm. Alarms | HDS Gen3 Operator Manual 145
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 146
    -out on the alarm message or siren. They remain until you acknowledge the alarm or until the reason for the alarm is removed. 146 Alarms | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 147
    Alarms dialog All alarms are setup in the Alarms Settings dialog. The alarm dialogs can also be activated from the Tools panel. The alarm dialogs include information about active alarms and alarm history. Alarms | HDS Gen3 Operator Manual 147
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 148
    148 Alarms | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 149
    the application screen. NMEA 0183 Data logging All serial output sentences sent over the NMEA 0183 TCP connection are logged to an internal file. You can export and review this file for service and fault , and then it starts overwriting the oldest data. Maintenance | HDS Gen3 Operator Manual 149
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 150
    chosen location. Software upgrades The latest software for the HDS Gen3 is available for download from our website, lowrance.com. Detailed instructions for how to install the software are included in the for exporting Waypoints, Routes, and Trails files: 150 Maintenance | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 151
    HDS system to a legacy Lowrance (LMS, LCX, etc.) This is the format most used on the web that shares among most GPS systems. Export all Waypoints, Routes and Trails Use the export option if you want to backup all Waypoints, Routes, and Trails on your system. Maintenance | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 152
    desired region 2. Select the export option from the menu 3. Select the appropriate file format 4. Select the serial port field to start the export 152 Maintenance | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 153
    Purging Waypoints, Routes and Trails Deleted Waypoints, Routes and Trails are stored in the HDS Gen3 memory until the data is purged. This is necessary to allow user data to system. Ú Note: When user data is purged from the memory, it cannot be recovered. Maintenance | HDS Gen3 Operator Manual 153
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 154
    to enter edit mode Scroll through a list of available options without activating any option. Flick to quickly scroll through e.g. the waypoint list. Tap the screen to stop the scrolling. Pan to position a chart or Sonar image on the panel. 154 Touchscreen operation | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 155
    Icon Description Pinch to zoom out on the chart or on an image. Spread to zoom in on the chart or on an image. Touchscreen operation | HDS Gen3 Operator Manual 155
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 156
    156 Touchscreen operation | HDS Gen3 Operator Manual
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 157
    Index A About this unit 142 Active panel 26 Adjusting panel size 30 Advanced settings SpotlightScan 83 Advanced system settings 142 AIS 118 Calling a vessel 120 Course extension lines 125 DSC 120 Icon filters 125 Information on radar panels 120 Searching for
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 158
    Bottom lock 71 C C-turn, Autopilot 101 Charts 33 3D charts 38 Chart compass 104 Chart data 34 Chart panel 34 Embedded cartography 34 Find chart objects 37 Insight 39, 40 Chart categories 40 Chart details 40 vessel on the chart panel 36 Saving waypoints 50 Selecting chart type 35 Settings 47 Symbol 36
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 159
    management 144 Find items tool 144 Fishing mode 73 Flasher 71 Frequency, SpotlightScan 83 Front panel 16 Fuel 142 FUSION-Link 126 G Go to cursor 26 Home page background 30 I Illumination 24 Image Trolling motor alignment 83 Improving system performance 153 Info panels 91 Customizing 91 Edit the
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 160
    Creating a MOB 28 Display information 28 Manual mode Sonar 68 Manual About 5 Version 5 Manuals, viewing 6 Measuring distance 27 Media 67 O Operating the system 15 Operation SpotlightScan tips 85 Touch 154 Options, SpotlightScan 83 Overlay data Configuring 31 turn on and off 31 Overlay downscan
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 161
    110 Threshold 109 Radio, as an audio device 131 Range SpotlightScan 83 Recording sonar data 68 reset fishing mode 74 Restore defaults 141 Routes 55 Navigate 59 Routes Dialog 49 S Satellites, system settings 141 Screen capture 29 Sensitivity Adjusting 67 Sonar 66 Settings Autopilot 104 Network 143
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 162
    Image 63 Log sonar 68 Manual mode 68 Menu 65 Network screen Sonar 70 SpotlightScan 81 Advanced settings 83 Configure heading sensor 82 Contrast 84 Display SpotlightScan images 82 Frequency 83 Image 81 Image and trolling motor alignment 83 Look Ahead 84 Operation tips 85 Options 83 Palettes 84 Range 83
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 163
    140 Settings 140 Trails 140 Waypoints 140 Touchscreen Calibration 149 Touch Operation 154 Touchscreen Locking 24 Trails Converting trails to routes motor Autopilot control 99 Configure heading sensor 82 Image alignment 83 Speed control 103 Turn off automatic navigation 97 Turn pattern steering
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 164
    customizing 30 Warranty 4 Waypoints, routes and trails Export 151 Export region 152 Purging 153 Waypoints 49 Alarm settings 51 Dialog 49 Edit 51 Moving 50 Weather Alarms 139 Showing weather details 136 Wind barbs 135 Wireless 22 X XTE alarm Navigating settings 61 XTE limit 61 XTF format 69 Z Zigzag
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 165
  • Lowrance HDS-7 Gen3 | Operators Manual US - Page 166
    0980 *988-10740-001*
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
ENGLISH
HDS Gen3
Operator Manual
lowrance.com