MSI 865GVM3-V User Guide - Page 12
Fan Power Connectors: CPUFAN1/SYSFAN1, Front Panel Connectors: JFP1/JFP2, Front Panel Audio
UPC - 816909009958
View all MSI 865GVM3-V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Fan Power Connectors: CPUFAN1/SYSFAN1 The 4-pin CPUFAN1 (processor fan) and 3-pin SYSFAN1 (system fan) support system cooling fan with +12V. CPUFAN1 can support three- or four-pin head connector. When connecting the wire to the connectors, always take note that the red wire is the positive and should be connected to the +12V, the black wire is Ground and should be connected to GND. If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control. MSI Reminds You... Always consult the vendors for proper CPU cooling fan. Front Panel Connectors: JFP1/JFP2 Power Power LED Switch The mainboard provides two front panel connectors for electrical connection to the front panel switches and LEDs. JFP1 is compliant with Intel Front Panel I/O 2 1 10 9 Connectivity Design Guide. HDD Reset LED Switch JFP1 Speaker 2 8 1 7 Power LED JFP2 Front Panel Audio Connector: JAUD1 The front panel audio connector allows you to connect to the front panel audio and is compliant with Intel ® Front Panel I/O Connectivity Design Guide. MSI Reminds You... If you do not want to connect to the front audio header, pins 5 & 6, 9 & 10 have to be jumpered in order to have signal output directed to the rear audio ports. Otherwise, the Line-Out connector on 9 1 the back panel will not function. 10 2 Front USB Connector: USB1/USB2 The mainboard provides two standard USB 2.0 pin headers USB1&USB2. USB2.0 technology increases data transfer rate up to a maximum throughput of 480Mbps, which is 40 times faster than USB 1.1, and is ideal for connecting high-speed USB interface peripherals such as USB HDD, digital cameras, MP3 players, printers, modems and the like. MSI Reminds You... Please note that the pins of VCC & GND must be connected correctly, or it may cause some damage 8