MSI MS 7005 User Guide - Page 55
Onboard Lan Boot ROM
UPC - 816909004229
View all MSI MS 7005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
MS-7005 Micro ATX Mainboard SiS S/W Modem This item is used to enable/disable the SiS S/W Modem. Settings: Auto, Disabled. SiS 10/100M Ethernet This item is used to enable/disable the 10/100M Ethernet function. Settings: Enabled, Disabled. Onboard Lan Boot ROM This item is used to decide whether to invoke the Boot ROM of the Onboard LAN Chip. Settings: Enabled, Disabled. Onboard SuperIO Device Press and the following sub-menu appears: Onboard FDC Controller Select Enabled if your system has a floppy disk controller (FDD) installed on the system board and you wish to use it. If you install add-on FDC or the system has no floppy drive, select Disabled in this field. Setting options: Enabled, Disabled. Onboard Serial Port 1/2 These items specify the base I/O port address and IRQ for the onboard Serial Port A (COM A)/Serial Port B (COM B). Selecting Auto allows BIOS to automatically determine the correct base I/O port address. Settings: Disabled, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Auto. Onboard Parallel Port This specifies the I/O port address and IRQ of the onboard parallel port. Settings: 378/IRQ7, 278/IRQ5, 3BC/IRQ7, Disabled. Parallel Port Mode This item selects the operating mode for the parallel port: Normal, SPP, EPP, ECP, or ECP+EPP. 3-16