MSI P7N SLI-FI User Guide - Page 102
Hot Plug Array
UPC - 816909045000
View all MSI P7N SLI-FI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
MS-7380 Mainboard From RAID 0+1 RAID 5 To RAID 0 RAID 1 RAID 0+1 RAID 5 RAID 0 RAID 1 RAID 0+1 RAID 5 New Array Disk Requirements mm >>=nn2 Number of RAID 0 disks must be equal to or greater than half the number of RAID 0+1 disks. ** Not a valid combination ** ** Not a valid combination ** m >= (n/2 + 1) m >= n - 1 ** Not a valid combination ** m >= 2 x (n -1) ; where m is an even number of disks. m >= n Hot Plug Array W ith respect to RAID, hot plugging is the ability to add a disk to a system safely and without causing problems for the RAID software. For example, when a drive in a mirrored array fails, the user can launch the Hot Plug Array W izard which instructs the user as to when a drive can be safely added to the system. As soon as the drive is added, the user can then finish running the RAID wizard and the drive becomes usable by the system. Hot Plug Array allows the user to add or remove an entire array without degrading the array in the process. NVRAIDMAN can be used to hot plug a RAID disk. To hot plug a disk, simply do the f ol l owi n g : 1 Launch NVRAIDMAN and click on "Hot Plug Array" and the following screen shot will appear: B-18