Mackie Opt24 Installation Guide - Page 5
top of the Sync card see illustration below and on next
View all Mackie Opt24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Installation Guide 9) Install the OPT•24 into the ACC1 PCI slot by carefully aligning the card's gold-plated connector edge to the PCI slot on the motherboard and pushing down gently but firmly until the card is fully seated into the slot. It may help to gently rock the board front to back until the board is completely seated. Note: Make sure the loose connector ends are pointing up so they can be accessed for step 11. 9) Install OPT•24 Board into the ACC1 PCI slot 10) Install Screw into the OPT•24 bracket RREEAARR PPAANNEELL ® MACKIE DESIGNS. ™ © 2000 ® MACKIE DESIGNS. ™ © 2000 FRONT PANEL 10) Install the screw that you removed from the blank cover plate to secure the OPT•24 to the HDR chassis. 11) Connect the short ribbon cables from the OPT•24 card to the adjacent Sync card by folding them over the top of the Sync card (see illustration below and on next page). 11) Connect the 2 short ribbon cables to the Sync Card RREEAARR PPAANNEELL FRONT PANEL Installation Guide 5