Magnavox 20MT4405 User manual, English (US) - Page 5

BASIC ANTENNA AND CABLE CONNECTIONS Your home's signal input might come from a single (75 ohm) round cable, a converter box or from an antenna. In either case the connection to the TV is very easy. 1 If your Cable TV signal or Antenna signal is a round cable (75 ohm) then you are ready to connect to the TV. If your antenna has flat twin lead wire (300 ohm), you first need to switch the antenna wires to the screws of a 75 ohm adapter. If you have a Cable Converter Box : Connect the Cable TV signal to the Cable Signal IN(put) plug on the Converter. 2 Connect the Cable TV cable or Antenna cable (or 300 to 75 ohm adapter) to the 75Ω plug on the TV. If you have a Cable Converter Box : Connect the OUT (put) plug from the Converter to the 75Ω plug on the TV. Antenna Connection Combination VHF/UHF Antenna (Outdoor or Indoor) 300 to 75Ω Adapter 1 Twin Lead Wire AV out CVI AV in 75‰ VIDEO Y L S-VIDEO Pb AUDIO R Pr Back of TV 75 2 Round Cable 75Ω Direct Cable Connection HELPFUL HINTS After using the Auto Program Control, press the CH+ and CH- buttons to scroll through all the channels stored in the television's memory. Cable signal coming from Cable Company 1 AV out CVI AV in 75‰ VIDEO Y L S-VIDEO Pb AUDIO R Pr Back of TV 75 75Ω Round Coaxial Cable Jack Panel Back of TV 5