Magnavox 27MS4504 User manual, English (US) - Page 8

4 USING THE AV1 IN OR AV2 IN (INPUT) JACKS The TV's audio/video input jacks are for direct picture and sound connections between the TV and a VCR (or similar device) that has audio/video output jacks. Both the AV1 and AV2 Input Jack connections are shown on this page, but either one can be connected alone. Follow the easy steps below to connect your accessory device to the AV1 and AV2 IN Jacks located on the back of the TV. 1 Connect the VIDEO (yellow) cable to the VIDEO AV1 IN (or AV2 IN) jack on the back of the TV. 2 Connect the AUDIO (red and white) cables to the AUDIO (left and right) AV1 IN (or AV2 in) jacks on the rear of the TV. 3 Connect the VIDEO (yellow) cable to the VIDEO OUT jack on the back of the VCR (either one or two) or accessory device being used. 4 Connect the AUDIO (red and white) cables to the AUDIO (left and right) OUT jacks on the rear of the VCR (either one or two) or accessory device being used. 5 Turn the VCR (either one or two) or accessory device and the TV ON. 6 Press the CH + or CH- buttons to set the TV to its AV1or AV2 channel. (Go to your lowest channel, for example channel 1, then change channels down to find the correct input.) 7 With either of the VCRs (or accessory devices) ON and a prerecorded tape (CD, DVD, etc.) inserted, press the PLAY button to view the tape on the television. Back of TV 1 Monitor out AV1 in VIDEO Y L/Mono AUDIO Pb AV2 in R Pr COMPONENT VIDEO INPUT AV1 2 Connection 2 3 S-VIDEO 4 ANT/CABLE S-VIDEO OUT OUT R L AUDIO OUT VIDEO OUT 1 Back of VCR 5 7 VCR One (or accessory device) (Equipped with Audio and Video Output Jacks) AV2 Connection Audio In (Red and White) Video In (Yellow) ANT/CABLE S-VIDEO OUT OUT 4 R L AUDIO OUT VIDEO OUT 3 HELPFUL HINT Audio and video cables are not supplied with the TV, but are available from Magnavox or electronics retailers. 5 VCR Two (or accessory device) (Equipped with 7 Video and Audio Output Jacks)