Magnavox CC19C1MG99 User manual, English (US) - Page 40

40 Real-Time Counter Memory Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later. 1 Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape. 2 2 Press the STATUS/EXIT button. The real-time counter will appear on the screen. 01:08 PM CH10 STOP SLP 1 : 23 : 45 3 While the counter remains on the screen, press the CLEAR button to reset the real-time counter to zero. 0 : 00 : 00 4 4 While the counter remains on the screen, press the MEMORY button so that M appears on the screen. To erase a real-time counter memory, press the MEMORY button so that the M disappears from the screen. 3 EJECT MENU POWER STATUS/EXIT CLEAR 1 2 3 4 5 6 7 8 9 SLEEP/ WAKE UP ALT.CH 0 REC PAUSE /OTR /STILL PLAY REW F.FWD STOP CH. VOL. MUTE SPEED TRACKING MEMORY 1,5 M 0 : 00 : 00 5 To go to the tape location where you set the real-time counter to zero, press the REW(ind)/s button or the F.FWD/B button when playback is stopped. When the tape reaches the point at which you set the counter to zero, the tape will stop. Press the PLAY/o button to watch the tape. Helpful Hints • The real-time counter memory will not function during Repeat Play mode. Details are on page 37. • You may only set one real-time counter memory at a time. If you set the real-time counter to zero at a second location, the previous realtime counter to zero setting will be lost.