Magnavox MDR557H Owner's Manual - English - Page 45
Notes, Notes for one-touch timer recording, Press [STOP, to stop recording.
View all Magnavox MDR557H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Introduction BASIC RECORDING & ONE-TOUCH TIMER RECORDING 4 Press [REC] to start recording. "I HDD" or "I DVD" will be displayed for 4 seconds. e.g.) DVD 5 Press [STOP C] to stop recording. The recorded title will appear in the title list. (Refer to "Guide to a Title List" on page 82.) e.g.) DVD-R Connections Basic Setup Recording Playback I DVD SP(2Hr) 2h00m Press [PAUSE F] to pause recording. Press [PAUSE F]] or [REC] again to restart recording. To set one-touch timer recording (OTR)... This is a simple way to set the recording time in blocks of 30 minutes. Press [REC] repeatedly until the desired recording time (30 minutes to 8 hours) appears on the TV screen. One-touch timer recording will start. I 0h30m 0h30m (normal recording) 1h00m 8h00m 7h30m To change the recording length during the onetouch timer recording: Press [REC] repeatedly until the desired length appear. To cancel the one-touch timer recording within the specified time: Press [STOP C]. When the recording is completed, the unit will ask you whether to turn the unit to the standby mode except under conditions listed below. - If a timer recording is programmed to start in 5 minutes. - During playback of HDD or DVD. - While displaying menus or information on the screen. • The unit will be turned to the standby mode automatically if you select "Yes" or if you do not reply in 1 minute. Writing to Disc 90% • This operation may take awhile to be completed. Note(s) • When you press [REC], recording starts immediately and continues until the HDD or disc is full, record 12 hours to HDD or you stop recording. • When the unit clock has not been set, the space for a date and time of title names will be blank. • When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel audio will be recorded. Refer to "Selecting TV Audio" on pages 36-37 for more details. • This unit cannot record in both stereo and SAP (secondary audio program) at the same time. • You cannot change the recording mode during the recording pause mode. • You can change a channel to be recorded during the recording pause mode. • You can play back a title on one component while making a recording on other. To do so, simply select the component (HDD or DVD) you like to use for the playback by pressing [HDD] or [DVD] during HDD / DVD recording. And then follow the normal playback procedure. • If playback and recording are in progress at the same time, select the appropriate component by pressing [HDD] or [DVD] before you press [PAUSE F] or [STOP C] to pause or stop the operation. Note(s) for one-touch timer recording • The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press [DISPLAY] to see it on the TV screen. • Unlike the timer recording, you can perform the following operations during one-touch timer recording. - Turning the power to the standby mode to stop one-touch timer recording. - Using [REC] or [STOP C] on the remote control. • You cannot use the pause function during one-touch timer recording. EN 45 Editing Function Setup Others Español