Magnavox MDR557H Owner's Manual - English - Page 97

Introduction Connections EDITING Choosing the Recording Format for a Blank DVD-RW Disc When inserting a brand-new DVD-RW disc, the unit automatically starts to initialise the disc. DVD-RW disc will be formatted either Video or VR mode according to the recording format mode setting on the unit. Before inserting a brand-new DVD-RW disc, you need to set the recording format to the desired mode. You can also manually format a DVD-RW disc once it has been used. Press [STOP C] if you are playing back a disc. 1 Press [MENU]. 2 Use [K / L] to select "Disc Edit", then press [OK]. 3 Use [K / L] to select "Format", then press [OK]. Disc Edit Format Finalize Disc Protect OFF ON Delete All Playlists Basic Setup Recording Playback Editing Function Setup 4 Use [K / L] to select "Format Mode", then press [OK]. 5 Use [K / L] to select "Video mode" or "VR mode", then press [OK]. FFoorrmmaat Mt Modoede 䂔 VViiddeeoommodoede 䂔 VVRRmmoodede VViiddeeoommodoede DVDD PPllaayyeerrCCoommppaatitbibilitlyitymmodoed.e. VVRRmmoodede EEdditiitninggpopsossibsilibtyilmitoydme. ode. Note(s) • The recording format setting is effective only for DVD-RW discs. You cannot change the recording format for a DVD-R disc. • You cannot mix two formats on one DVD-RW disc. If you insert a disc that has been recorded before, the recording format cannot be changed even if you change it in "Setup" menu. 6 Press [MENU] to exit. 7 Insert a blank disc. Formatting will start. 8 Formatting is complete. "100%" is indicated. EN 97 Others Español