Magnavox MHT843n Owners Manual - Page 10

BT (Bluetooth): Listen music from external BT device: BT (Bluetooth) pairing: First time use or re-pairing the unit to a new BT Device, pair as follows: 1. Power on the unit as previously instructed. 2. Press the STANDBY/SOURCE Button on the top of unit or press the SOURCE Button on the Remote Control repeatedly until the color of the indicator turns Blue and blinks. 3. Power on the external BT Device and enter to BT searching mode. Start pairing following the on screen instructions from the external BT Device. When paired, the Blue Indicator will stop blinking. 4. If pairing is complete you may now play music with your external BT Device. 5. During playback:  Press the Button on the unit or Remote Control to pause, press again to resume normal playback.  Press the (MUTE) Button on the Remote Control to turn off the sound temporary, press again to turn it back.  Press the /Tune -/VOL - or /Tune +/VOL + buttons on the unit or the VOL +/- buttons on the Remote Control to adjust volume level as desired.  Press and hold the /Tune -/VOL - or /Tune +/VOL + buttons on the unit or press the /Tune - or /Tune + buttons on the Remote Control to skip tracks. Notes:  When the external BT Device searches for the unit, our model number "MHT843n" will appear on the display of external BT Device.  If while pairing you are asked for a code please try "0000" or "1234". Normal operation after pairing: 1. Power on the external BT Device and enter to BT playback mode. 2. Power on the unit and enter to BT mode as previously instructed. The color of the indicator will turn to Blue and blink. 3. Wait a few seconds until the unit is automatically paired to the external BT Device. (The Blue Indicator will stop blinking). 4. After pairing is complete you may now play music with your external BT Device. 10