Magnavox MHT843n Owners Manual - Page 9

OPERATION GENERAL OPERATION: 1. Connect the supplied AC/DC Adaptor to the unit and wall outlet as previously instructed. The Red Standby Indicator on the top of unit will illuminate. 2. Press and hold the STANDBY/SOURCE Button on the top of unit or press the / STANDBY Button on the Remote Control to turn on the unit from standby mode. The color of the indicator will turn to corresponding color. You will also hear an audible prompt say "Power on". 3. Press the STANDBY/SOURCE Button on the top of unit or press the SOURCE Button on the Remote Control repeatedly to switch to desired playback mode. The color of the indicator will turn to corresponding color with your selection (see list below): Playback Mode: BT (Bluetooth) FM Radio LINE IN AUX IN Color of Indicators: Blue (and blinking) Green Purple (Red + Blue) Orange (Red + Green) 4. During playback,  Press the /Tune -/VOL - or /Tune +/VOL + buttons on the unit or the VOL +/- buttons on the Remote Control to adjust volume level as desired.  Press the (MUTE) Button on the Remote Control to turn off the sound temporarily, press again to turn it back on. 5. When finished, press and hold STANDBY/SOURCE Button on the top of unit or press the / STANDBY Button the Remote Control to turn the unit to standby mode. The color of the Indicator will turn Red. 6. If you will not use the unit for an extended period of time, unplug the AC/DC Adaptor from wall outlet. 9