Magnavox MSB4620/F7 Owners Manual English - Page 15

Choosing Preset Sound 1 Press either , , , , or on the Remote Control to select the desired preset sound suitable for the Audio that is playing. 2 The LED in the center (OPTICAL/COAXIAL) blinks yellow once. 3 When the preset sound setting is set, LED indicators go back to the current Input. NOTE(S) ● Select any Preset Sound according to your preference, regardless of categories. ● The default Preset Sound is MOVIE. ● This setting will remain while the Soundbar is in Standby mode. Night Mode Night Mode 1 Turns down the Volume on the Subwoofer. It is useful late at night. 1 To switch the unit to Night Mode 1, press . Night Mode 2* (Dynamic Range Control) Adjusts for clarity even when the Volume is Low, by compressing the range of the lowest sound level and the highest sound level. 1 To switch the unit to Night Mode 2, press and hold . * This function is only effective for Dolby Digital sounds. * This function is only available when the Soundbar is connected via Optical or Coaxial. Mode LED lighting patterns LED behavior Sound effects Night Mode 1 LINE USB OPTICAL/ AUX COAXIAL PAIR On : Flashes 4 times Off : Flashes twice On : Lowers the Volume of the Subwoofer. Off : Outputs the Sound at the same Volume as the original. Night Mode 2 LINE USB OPTICAL/ AUX COAXIAL PAIR On : Flashes 4 times Off : Flashes twice On : Turns down loud sounds and turns up Off : Outputs the Sound at the same Volume as the original. Input Source Night Mode 1 OPTICAL/COAXIAL Dolby Digital PCM p p LINE p AUX p USB p BLUETOOTH p Night Mode 2 p - NOTE(S) ● The Default setting of both Night Modes is Off. ● These Settings will remain while the Soundbar is in Standby mode, so again use mode to the next mode. to turn the mode from current EN - 15 -