Makita AF601 AF601 Instruction Manual - Page 6
Assembly
View all Makita AF601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Air duster CAUTION: Do not aim the ejection port of the air duster to someone. Also, keep your hands and foot away from the ejection port. If the air duster button is accidentally pushed, it may cause a personal injury. CAUTION: Always check your surroundings before using the air duster. Blown dust or objects may hit someone. CAUTION: Do not connect or disconnect the air hose while pushing the air duster button. The air supplied to the tool can also be used as an air duster. You can clean the work area by pressing the button on the grip end. 1 1 ► 1 . Pusher lever 2. Insert a strip of nails into the slit in the rear of the magazine and push the strip toward the firing opening. ► 1 . Button NOTICE: After using the air duster, the driving force of the tool will temporarily decline. Wait until the air pressure recovers in this case. NOTICE: Perform a test blow if you use the air duster immediately after the oil was applied. The oil may be sprayed with the air. 1 ► 1 . Magazine 3. With pushing the pusher button, return the pusher lever to the end of the strip gently. ASSEMBLY CAUTION: Before carrying out any work on the tool, always return the trigger and disconnect the air hose from the tool. CAUTION: Load the same type, size and uniform length of nails when loading nails in the magazine. Loading nailer 1. Pull the pusher lever until it is locked at the magazine end. 1 2 ► 1 . Pusher button 2. Pusher lever CAUTION: Always hold the pusher lever when you press the pusher button to return the pusher lever, otherwise the pusher lever suddenly returns, it may cause personal injury. Removing nails 1. Pull the pusher lever until it is locked at the magazine end. 2. Slide the nails toward the rear of the magazine and remove them out. 6 ENGLISH