Makita AN611 Owners Manual - Page 16

Caution

Get Makita AN611 PDF manuals and user guides View all Makita AN611 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

MAINTENANCE CAUTION: Always be sure that the trigger is locked and the air hose is disconnected from the tool before attempting to perform inspection or maintenance. Maintenance of nailer Always check the tool for its overall condition and loose screws before operation. Tighten as required. Make sure all safety systems are in working order before operation. The tool must not operate if only the trigger is pulled or if only the contact element is pressed against the wood. It must work only when both actions are performed. Test for possible faulty operation with nails unloaded. I I 1 Make sure that the trigger is locked when the change lever is set to the LOCK position. ' Change Trigger lock 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
MAINTENANCE
CAUTION:
Always be sure that the trigger is locked and the air hose is disconnected from the tool before attempting
to perform inspection or maintenance.
Maintenance of nailer
Always check the tool for its overall condition and loose
screws before operation. Tighten as required.
Make sure all safety systems are in working order before operation. The tool must not operate if only
the trigger
is
pulled or if only the contact element is pressed against the wood. It must work only when
both actions are performed. Test for possible faulty operation with nails unloaded.
I
I
1
Make sure that the trigger is locked when the change lever
is set to the
LOCK
position.
'
Change
Trigger lock
16