Makita AN611 Owners Manual - Page 17
Maintenance, compressor, air set and air hose
 |
View all Makita AN611 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
When the tool is not to be used for an extended period of time, lubricate the tool using pneumatic tool oil and store the tool in a safe place. Avoid exposure to direct sunlight and/or a humid or hot environment. Maintenance of compressor, air set and air hose After operation, always drain the compressor tank and the air filter. If moisture is allowed to enter the tool, it may result in poor performance and possible tool failure. I 1 I Drain cock 7 Air Check regularly to see if there is sufficient pneumatic oil in the oiler of the air set. Failure to maintain sufficient lubrication will cause O-rings to wear quickly. Oiler/ - I Pneumatic 011
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19
 |
 |
When the tool is not to be used for an extended period of time, lubricate the tool using pneumatic
tool oil and store the tool in a safe place. Avoid exposure to direct sunlight and/or a humid or hot
environment.
Maintenance
of
compressor, air set and air hose
After operation, always drain the compressor tank and the air filter.
If
moisture is allowed to enter the
tool, it may result in poor performance and possible tool failure.
I1
I
Drain
cock
7
Air
Oiler
-
/
Check regularly to see
if
there is sufficient pneumatic oil
in the oiler
of
the air set. Failure to maintain sufficient
lubrication will cause O-rings to wear quickly.
Pneumatic
011
I