Makita JR3070CT Owners Manual - Page 4
Save These Instructions, Symbols, Functional Description - blades
View all Makita JR3070CT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
10. Always switch off and wait for the blade to come to a complete stop before removing the blade from the workpiece. 11. Do not touch the blade or the workpiece immediately after operation; they may be extremely hot and could burn your skin. 12. Some material contains chemicals which may be toxic. Take caution to prevent working dust inhalation and skin contact. Follow material supplier safety data. SAVE THESE INSTRUCTIONS WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. SYMBOLS USD201-2 The followings show the symbols used for tool. V volts A amperes Hz hertz alternating current n no load speed Class II Construction .../min revolutions or reciprocation per minute FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Adjusting the shoe 005784 1. Shoe 2. Shoe button A 1 2 005785 1. Shoe button 2. Shoe B 1 2 When the blade loses its cutting efficiency in one place along its cutting edge, reposition the shoe to utilize a sharp, unused portion of its cutting edge. This will help to lengthen the life of the blade. To reposition the shoe, push the shoe button in the "A" direction with a click and reposition as shown in the figure which allows you to make five-way adjustment. To secure the shoe, push the shoe button in the "B" direction with a click. Selecting the cutting action 006024 1 2 1. Lever 2. Stopper This tool can be operated with an orbital or a straight line cutting action. The orbital cutting action thrusts the blade forward on the cutting stroke and greatly increases cutting speed. To change the cutting action, press the stopper and turn the lever to the desired cutting action position. Then, release the stopper to lock the lever. Refer to the table to select the appropriate cutting action. NOTE: • Orbital action means that the saw blade moves up and down, and back and forth at the same time. This increases the efficiency of cutting. Position 0 I II III Cutting action Straight line cutting action Small orbit cutting action Medium orbit cutting action Large orbit cutting action 002525 Applications For cutting mild steel, stainless steel and plastics. For clean cuts in wood and plywood. For cutting mild steel, aluminum and hard wood. For cutting wood and plywood. For fast cutting in aluminum and mild steel. For fast cutting in wood and plywood. 4