Makita LS1221 Owners Manual - Page 19
CONTACT EDGE against the guide fence
View all Makita LS1221 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Example: In the case of cutting 52/38° type crown molding for position (1) in Fig. A: • Tilt and secure bevel angle setting to 33.9° LEFT. • Adjust and secure miter angle setting to 31.6° RIGHT. • Lay crown molding with its broad back (hidden) surface down on the turn base with its CEILING CONTACT EDGE against the guide fence on the saw. • The finished piece to be used will always be on the LEFT side of the blade after the cut has been made. 19
19
Example:
In the case of cutting 52/38
°
type crown molding for
position (1) in Fig. A:
•
Tilt and secure bevel angle setting to 33.9
°
LEFT.
•
Adjust and secure miter angle setting to 31.6
°
RIGHT.
•
Lay crown molding with its broad back (hidden)
surface down on the turn base with its CEILING
CONTACT EDGE against the guide fence on
the saw.
•
The finished piece to be used will always be on
the LEFT side of the blade after the cut has
been made.