Makita XGC01Z Makita XGC01Z Instruction Manual - Page 2

ENGLISH (Original instructions) SPECIFICATIONS Model XGC01 Max feed force 5,000 N (1,100 lbs) Feed speed 0 - 28 mm/s (0 - 66 inch/min) with short (300 ml (18.3 cu.in)) holder 214 mm (8-3/4") Stroke with long (600 ml (36.6 cu.in)) holder 350 mm (13-3/4") with long (800 ml (48.8 cu.in)) holder 285 mm (11-1/4") with short (300 ml (18.3 cu.in)) holder 404 mm (15-7/8") Overall length with long (600 ml (36.6 cu.in)) holder 538 mm (21-1/4") with big (800 ml (48.8 cu.in)) holder 480 mm (18-7/8") Standard battery cartridge BL1815 / BL1815N / BL1820 BL1830 / BL1840 / BL1850 with short (300 ml (18.3 cu.in)) holder 2.1 kg (4.7 lbs) 2.3 kg (5.1 lbs) Net weight with long (600 ml (36.6 cu.in)) holder 2.5 kg (5.5 lbs) 2.7 kg (6.0 lbs) with big (800 ml (48.8 cu.in)) holder 2.4 kg (5.4 lbs) 2.7 kg (5.9 lbs) Rated voltage D.C. 18 V • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications and battery cartridge may differ from country to country. • Weight, with battery cartridge, according to EPTA-Procedure 01/2003 GEA006-2 General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Work area safety 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. 3. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. Electrical safety 4. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 5. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. 6. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 7. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. 8. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. 9. If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of an GFCI reduces the risk of electric shock. Personal safety 10. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. 11. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or 2