Makita XT286SM1 XRU11 Instruction Manual - Page 12

1 2 ► 1 . Hex socket head bolt 2. Hanger Hex wrench storage CAUTION: Be careful not to leave the hex wrench inserted in the tool head. It may cause injury and/or damage to the tool. When not in use, store the hex wrench as shown in the figure to keep it from being lost. OPERATION Correct handling of tool WARNING: Always position the tool on your right-hand side. Correct positioning of the tool allows for maximum control and will reduce the risk of serious personal injury caused by kickback. WARNING: Be extremely careful to maintain control of the tool at all times. Do not allow the tool to be deflected toward you or anyone in the work vicinity. Failure to keep control of the tool could result in serious injury to the bystander and the operator. WARNING: To avoid accident, leave more than 15m (50 ft) distance between operators when two or more operators work in one area. Also, arrange a person to observe the distance between operators. If someone or an animal enter the working area, immediately stop the operation. 1 ► 1 . Hex wrench ► 1 . Grip 2. Hex wrench Attachment of shoulder harness CAUTION: Always use the shoulder harness 1 attached. Before operation, adjust the shoulder harness according to the user size to prevent fatigue. Connect the hook of the shoulder harness to the hanger and put the shoulder harness on. Make sure that the tool is held securely by the shoulder harness. 2 2 1 ► 1 . Hook 2. Hanger 12 ENGLISH