Marantz NR1601 NR1601 User Manual - English - Page 28

ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Tuning in radio stations Listening to FM/AM broadcasts 1 Press TUNE twice to switch the input source to "TUNER". 2 Press BAND to select "FM" or "AM". FM When listening to an FM broadcast. AM When listening to an AM broadcast. 3 Tune in the desired broadcast station. q To tune in automatically (Auto tuning) Press T.MODE to light the "AUTO" indicator on the display, then use TUNING + or TUNING - to select the station you want to hear. w To tune in manually (Manual tuning) Press T.MODE to turn off the display's "AUTO" indicator, then use TUNING + or TUNING - to select the station you want to hear. nnPresetting radio stations (Manual preset) Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. • Stations can be preset automatically at "Auto Preset" (vpage 41). If "Auto Preset" is performed after performing "Manual Preset", the "Manual Preset" settings will be overwritten. 1 Tune in the broadcast station you want to preset. nnListening to preset stations 1 Press SHIFT/TOP MENU to select the memory block (A to G). 2 Press PRESET +, PRESET - or 1 - 8 to select the desired preset channel. 2 Press MEMORY. 3 Press SHIFT/TOP MENU to select the block (A to G) in which to preset the channel (1 to 8 per block), then press PRESET +, PRESET - or 1 - 8 to select the preset number. 4 Press MEMORY again to complete the setting. • To preset other stations, repeat steps 1 to 4. You can also operate via the main unit. In this case, perform the following operations. Press o p to select the preset radio station. • If the desired station cannot be tuned in with auto tuning, tune it in manually. • When tuning in stations manually, press and hold TUNING + or TUNING - to change frequencies continuously. • You can specify the duration of the on-screen display to be displayed (default: 30 sec) at menu "TUNER" (vpage 53). Press uio p to return to the original screen. Default settings Block (A - G) and Channel (1 - 8) A1 - A8 B1 - B8 C1 - C8 D1 - D8 E1 - E8 F1 - F8 G1 - G8 Default Settings 87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 / 90.1 MHz 520 / 600 / 1000 / 1400 / 1710 kHz, 90.1 / 90.1 / 90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz Specify a name for the preset broadcast station (Preset Name) (vpage 42) nnDirect frequency tuning You can enter the receiving frequency directly to tune in. 1 Press SEARCH/INFO. 2 Input frequencies using the 0 - 9. • If o is pressed, the immediately preceding input is cancelled. 3 When setting is completed, press ENTER. The preset frequency is tuned in. 24