Marantz PM-14S1 HDAM & Current feedback Amp of Marantz Unique technolo - Page 18

ENGLISH Connecting P.DIRECT IN connectors If you use a pre-amplifier, connect it as shown below, and then you can use this unit as a power amplifier. Press and hold P.DIRECT IN on the unit for 3 seconds or longer. • The power amp direct mode setting changes with each press of the button. • If the mode is set to on, the display shows "POWER AMP DIRECT". On : Allows the device connected to the Power Amp Direct connector to be played. Off (Default): Allows the program source selected using INPUT SELECTOR to be played. Connecting PRE OUT connectors If you use a power amplifier, connect it as shown below, and then you can use this unit as a pre-amplifier. • For connecting speaker systems, refer to the owner's manual supplied with the power amplifier to be used. Power-amplifier Pre-amplifier Speakers (L) (R) L R To input connectors To PRE OUT connectors R L L R L R NOTE The power amp direct mode and the PRE OUT function cannot work at the same time. NOTE • When the power amp direct mode is on, adjustment of the volume, balance and tone on the main unit has no effect. Adjust the volume on the pre-amplifier. • When the power amp direct mode is on, the main unit outputs at maximum volume. Check the output level on the input device before playing it and adjust the volume accordingly. 14