Marantz PM-14S1 HDAM & Current feedback Amp of Marantz Unique technolo - Page 24
Troubleshooting
View all Marantz PM-14S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
ENGLISH Tips Tips nnI want to adjust the tone myself • You can adjust the tone as desired using the BASS and TREBLE knobs and the balance adjustment function (vpage 17). nnI want to adjust the attenuation level when muting sound • The attenuation level can be set at -20 dB, -40 dB, or -∞ (vpage 17). nnI want to use this unit as a power amplifier • Turn the power amp direct mode on (vpage 18). nnI want to use this unit as a pre-amplifier • Connect the power amplifier to the PRE OUT connectors of this unit (vpage 14). nnI want to turn the illumination lamps on both sides of the unit main panel off • Turn the illumination lamp setting off (vpage 19). Troubleshooting nnAre the connections correct? nnIs the unit being operated as described in the owner's manual? nnAre the other components operating properly? If this unit does not operate properly, check the items listed in the table below. If the problem persist there may be a malfunction. In that case, disconnect the power immediately and contact your retail outlet. Contents Power does not turn on / Power is turned off 21) Operations cannot be performed through the remote control unit 21) No sound comes out 22) Desired sound does not come out 22) Sound is interrupted or noise occurs 22) Error messages 23) nnI want to use two or more of these units for high quality playback • Use the stereo complete bi-amp connections (vpage 11). • Use the multi-channel playback connections (vpage 12). nnI want to use this unit's remote control to operate a Marantz CD player • Switch the remote control control mode to CD. • Also refer to the CD player Owner's Manual. 20