Marantz PM5005 PM5005 Owner Manual In English - Page 33

Contents Connections Playback Settings Tips Appendix Setting remote control codes for the remote control o To set the remote control codes to AMP2 1 Hold down REMOTE MODE CD and the number 2 button for more than 5 seconds. o To set the remote control codes to AMP3 1 Hold down REMOTE MODE CD and the number 3 button for more than 5 seconds. To return the remote control code to the default setting, hold down REMOTE MODE CD and the number 1 button for more than 5 seconds. NOTE The remote control codes returns to the default settings when the batteries are removed. Set the remote control codes again after replacing the batteries. Setting remote control codes for this unit 1 Point the remote control for which the remote control code was set at this unit, and press REMOTE MODE CD and ENTER. The input indicators on the unit flash as shown below according to the set remote control code. Remote control codes AMP 1 AMP 2 AMP 3 Input indicator PHONO indicator flashes three times TUNER indicator flashes three times CD indicator flashes three times Front panel Rear panel Remote control 33 unit Index