Marantz PM5005 PM5005 Owner Manual In English - Page 37

Contents Connections Playback Settings Tips Appendix o Operations cannot be performed through the remote control unit Symptom Cause / Solution Operations cannot be performed through the remote control unit. 0 Batteries are worn out. Replace with new batteries. 0 Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°. 0 Remove any obstacle between this unit and the remote control unit. 0 Insert the batteries in the proper direction, checking the q and w marks. 0 The set's remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb light, etc.). Move the set to a place in which the remote control sensor will not be exposed to strong light. 0 When using a 3D video device, the remote control unit of this unit may not function due to effects of infrared communications between units (such as TV and glasses for 3D viewing). In this case, adjust the direction of units with the 3D communications function and their distance to ensure they do not affect operations from the remote control unit of this unit. 0 Enable the remote signal receiving function. 0 The remote control code between this unit and the remote control is different. Set this unit and the remote control to the same remote control code. Page 5 5 － 5 － － 31 33 Front panel Rear panel Remote control 37 unit Index