Marantz RC1200 User Guide
Marantz RC1200 Manual
 |
View all Marantz RC1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Marantz RC1200 manual content summary:
- Marantz RC1200 | User Guide - Page 1
R Model RC1200 User Guide Learning Remote Control - Marantz RC1200 | User Guide - Page 2
MAIN FEATURES & FUNCTIONS ........ 2 NAMES OF PARTS & FUNCTIONS ..... 3 LOADING BATTERIES 8 BASIC OPERATION 9 USE MODE 9 LEARN MODE 10 PROGRAMMING THE JOG DIAL 13 REWRITING NAMES 14 ERASING PROGRAMMED CODES 16 PROGRAMMING MACROS 20 EDITING MACROS 22 USING MACROS 24 EXAMPLES OF MACRO - Marantz RC1200 | User Guide - Page 3
uses a non-volatile memory so that the learned codes will be retained even if the batteries are removed. • PRESET CODES Function buttons already contain preset codes (using the RC-5/RC-6 remote control language) for other remote-controllable Marantz audio-visual component. (This does not apply - Marantz RC1200 | User Guide - Page 4
OF PARTS & FUNCTIONS Names of Buttons & Functions z MODE button Used to change the operation mode of the remote controller. Pressing this button cycles the remote controller through USE → LEARN → NAME → CLONE TX → CLONE RX → USE, with the currently selected mode displayed on the LCD. x MACRO button - Marantz RC1200 | User Guide - Page 5
button , is used only to switch the command set of the remote controller itself and therefore does not transmit any signal. Further, the function series simply by pressing a single button.) One button can be programmed to learn sequences containing up to 10 commands. The following is an example of - Marantz RC1200 | User Guide - Page 6
ENGLISH ⁄4 GUIDE button Used to call up the on-screen menus used to control DVD players, digital satellite systems (DSS), components. This window should also be pointed toward the source remote controller when using Programmable Learning function. ⁄9 LIGHTING button When this button is pressed, the - Marantz RC1200 | User Guide - Page 7
indicator Indicates when the remote controller is transmitting a signal. E USE indicator Indicates the status in which the programmed code is output.For normal operation the USE indicator is displayed. F LEARN indicator Indicates when the remote controller is in the LEARN mode. It also appears - Marantz RC1200 | User Guide - Page 8
a button is pressed in order to transmit a command, the transmission or learning is not possible. In such a case, please replace the batteries. Operating tip • This remote controller uses non-volatile memory, so that learned codes and macros will be preserved even if the batteries are removed. - Marantz RC1200 | User Guide - Page 9
ENGLISH LOADING BATTERIES The life of the batteries used with the remote control unit is about 6 months with normal use. Also be sure to replace batteries earlier when you notice that they are getting weak. Do not use - Marantz RC1200 | User Guide - Page 10
mode. It comes preset with codes commonly used to control 11 types of components manufactured by Marantz, Philips and RCA (for DSS), including DSS, DVD, TV, LD, VCR, AUX, TUNER, CD, TAPE, CD-R/MD, and AMP, as well as many others that utilize the RC-5 remote control language. 1. Press once one of - Marantz RC1200 | User Guide - Page 11
or other mode. 2. Place the laser disc's remote controller so that its infrared signal transmitter is facing the infrared signal receiver on the Marantz remote controller at a distance of about 5 centimeters (2 inches). 5cm LEARNING REMOTE CONTROL RC 7000 MACRO MODE OFF ON / OFF SOURCE POWER - Marantz RC1200 | User Guide - Page 12
control mode after the LD function button , on the remote controller has been pressed, press the < • 3 (CURSOR/CONTROL switching) button ⁄1 to display " ". DSS TV VCR AUX L D TUNER TAPE AMP CLEAR MEMO AUTO DOLBY THX 123 GUIDE 's remote controller. The remote controller has finished learning the - Marantz RC1200 | User Guide - Page 13
that cannot be learned by the Marantz remote controller. 6. Follow the same procedure to make the remote controller learn the ten-key ⁄7 operation used by the laser disc player's remote controller. 7. Repeat the procedure from step 3 to have the remote controller learn the signal codes for the other - Marantz RC1200 | User Guide - Page 14
, then press and release the ENT button n. • The LEARN and NAME indicators will both be displayed. 5. Press the SIDE-B button on the laser disc's remote controller continuously until OK is displayed on the Marantz remote controller's LCD, indicating that the programming has been completed. • If - Marantz RC1200 | User Guide - Page 15
pen or other sharp point to press the MODE button z to return the remote controller to the USE mode. The LCD displays USE indicator, and the newly programmed codes now can be used. REWRITING NAMES This remote controller allows the names accessible by Jog Dial m to be rewritten with new ones - Marantz RC1200 | User Guide - Page 16
ENGLISH 4. The left-hand edge of LCD B now blinks to indicate that the character at the blinking location can now be overwritten. New characters entered will be written over the top of the current character so that the current character is erased. Use the < and > Cursor buttons ⁄0 to select the - Marantz RC1200 | User Guide - Page 17
. The USE indicator is displayed on the LCD, and the newly programmed codes now can be used. POWER SOURCE ON ON / OFF OFF LEARNING REMOTE CONTROL RC 1200 MACRO MODE ERASING PROGRAMMED CODES (Returning to Factory Presets) Codes that have been programmed into the memory can be erased in 4 ways - Marantz RC1200 | User Guide - Page 18
LEARNING REMOTE CONTROL RC 1200 MACRO MODE 2. Erasing by Button(s) To clear the codes and names programmed in any of the buttons • Press the button concerned twice while holding down the CLEAR button ⁄5. When the codes THX 123 GUIDE DTS 4 MUTE HALL 5 2. Press the OK Cursor button ⁄0 twice. - Marantz RC1200 | User Guide - Page 19
MD DSS TV VCR AUX L D TUNER TAPE AMP CLEAR MEMO AUTO DOLBY THX 123 GUIDE DTS 4 MUTE HALL 5 While holding down the CLEAR button ⁄,5 press both the ahead with the clearing operation, press the OK Cursor button ⁄.0 Clearing the codes returns all ten of the command names in the Jog Dial to their - Marantz RC1200 | User Guide - Page 20
Function This procedure clears all the codes and names programmed for the LD, TV or any DVD CD-R/MD DSS TV VCR AUX L D TUNER TAPE AMP CLEAR MEMO AUTO DOLBY THX 123 MATRIX MOVIE 2CH GUIDE DTS 4 OSD MUTE HALL 5 SLEEP This will return the button to its factorypresets or leave it empty if no - Marantz RC1200 | User Guide - Page 21
press the OK Cursor button ⁄.0 Once the data is cleared, the codes are either returned to their original display or left empty. LCD is similarly until the MACRO and LEARN indicators are displayed blinking on the LCD. POWER SOURCE ON ON / OFF OFF LEARNING REMOTE CONTROL RC 1200 MACRO MODE - Marantz RC1200 | User Guide - Page 22
-M, DSS-M, VCR-M, AUX-M, TUN-M, CD-M, TP-M, AMP-M, CDR-M (or MD-M for remote controller set for MD). • If a macro has already been set for the selected function button, VCR AUX L D TUNER TAPE AMP CLEAR MEMO GUIDE MUTE AUTO DOLBY THX DTS HALL Each function button can be programmed to perform up - Marantz RC1200 | User Guide - Page 23
, only the function mode of the remote controller is changed, and no signals are sent. EDITING MACROS Macros may be edited using following procedure. 1. Use a ballpoint pen or other sharp point to press the MACRO button x until the MACRO and LEARN indicators are displayed blinking on the LCD - Marantz RC1200 | User Guide - Page 24
if no macros have been programmed, and the remote controller is ready for macro programming. 3. While pressing is inserted when the total number of steps is already 10. L D TUNER TAPE AMP CLEAR MEMO GUIDE MUTE AUTO DOLBY THX DTS HALL 1 2 34 5 MATRIX MOVIE 2CH 6 78 OSD SLEEP 90 - Marantz RC1200 | User Guide - Page 25
in the macro is displayed on LCD C. CD DVD CD-R/MD DSS TV VCR AUX L D TUNER TAPE AMP CLEAR MEMO AUTO DOLBY THX GUIDE DTS MUTE HALL • The remote controller will do nothing if no macros are programmed. The macro steps are executed in order and the names of their buttons are displayed - Marantz RC1200 | User Guide - Page 26
pen or other sharp point to press the MACRO button x. POWER SOURCE ON ON / OFF OFF LEARNING REMOTE CONTROL RC 1200 MACRO MODE 2. Press the CD function button ,. CD-M is displayed on the LCD. CH OK MEMO AUTO DOLBY THX 123 MATRIX MOVIE 2CH 6 78 GUIDE DTS 4 OSD 9 MUTE HALL 5 SLEEP 0 - Marantz RC1200 | User Guide - Page 27
press the MACRO button x. POWER SOURCE ON ON / OFF OFF LEARNING REMOTE CONTROL RC 1200 MACRO MODE Now, execute the macro you just programmed. 1. CD DVD CD-R/MD DSS TV VCR AUX L D TUNER TAPE AMP CLEAR MEMO GUIDE MUTE AUTO DOLBY THX DTS HALL • Here the LD Function button , is used - Marantz RC1200 | User Guide - Page 28
MEMO DOLBY THX GUIDE DTS MUTE HALL The macro commands are transmitted in order, and the names of the operations being performed are displayed on LCD A in order. • When executing this macro, function operations AMP*, TV*, and LD* only switch the command set of the remote controller and no signal - Marantz RC1200 | User Guide - Page 29
following procedure is used to erase macros you have programmed into the remote controller's memory. • When one of the function buttons , (LD in w q CD DVD CD-R/MD DSS TV VCR AUX L D TUNER TAPE AMP CLEAR MEMO GUIDE MUTE AUTO DOLBY THX 123 MATRIX MOVIE 2CH 6 78 DTS HALL 4 5 OSD SLEEP 90 - Marantz RC1200 | User Guide - Page 30
from and directly in front of the transmitter (also in the head section) of the remote controller at the sending end. MODE OFF ON MACRO LEARNING REMOTE CONTROL RC 1200 LEARNING REMOTE CONTROL RC 1200 POWER SOURCE ON / OFF POWER SOURCE ON / OFF MACRO O N OFF MODE 5cm 2. Use a ballpoint - Marantz RC1200 | User Guide - Page 31
unit to call up the CLONE and RX displays. CLONE appears at LCD A and RX at LCD B. POWER SOURCE ON ON / OFF OFF LEARNING REMOTE CONTROL RC 1200 MACRO MODE 4. Press the OK Cursor button ⁄0 on the receiving unit. 5. Press the OK Cursor button ⁄0 on the sending unit. The copying operation - Marantz RC1200 | User Guide - Page 32
is completed, use a ballpoint pen or other sharp point to press the MODE button z on both remote controllers to call up the USE display. POWER SOURCE ON ON / OFF OFF LEARNING REMOTE CONTROL RC 1200 MACRO MODE Note: If RX NG is displayed, all the receiving unit's buttons which were programmed - Marantz RC1200 | User Guide - Page 33
Jog Dial codes can be LEARNING REMOTE CONTROL RC 1200 MACRO MODE 2. Press the MEMO button ⁄6 for 3 seconds. (The learn mode of the MEMO button is established first, and after 3 seconds it changes to the COPY mode.) "CPY→" appears at LCD A. L D TUNER TAPE AMP CLEAR MEMO AUTO DOLBY THX 123 GUIDE - Marantz RC1200 | User Guide - Page 34
CPY←" appears at LCD A. CD DVD CD-R/MD q DSS TV VCR AUX L D TUNER TAPE AMP w CLEAR MEMO AUTO DOLBY THX 123 MATRIX MOVIE 2CH 6 78 GUIDE DTS 4 OSD 9 MUTE HALL 5 SLEEP 0 The copy source has now been established. 4. The copy destination is selected next. Press the DVD function button ,, and - Marantz RC1200 | User Guide - Page 35
point to press the operation MODE button z to call up the LEARN display. LEARN now blinks on the LCD display. POWER SOURCE ON ON / OFF OFF LEARNING REMOTE CONTROL RC 1200 MACRO MODE 2. Press the MEMO button ⁄6 for 3 seconds. (The learn mode of the MEMO button is established first, and after - Marantz RC1200 | User Guide - Page 36
ENGLISH CD appears at LCD B, and then the 1 (DISC+) characters stop blinking and remain lighted. (The Jog Dial name is displayed.) The copy source has now been established. "CPY←" appears at LCD A. 4. The copy destination is selected next. Press the DVD function button ,, turn the Jog Dial m to - Marantz RC1200 | User Guide - Page 37
as follows: 1. While pressing the MEMO button ⁄6 , press the OK Cursor button ⁄0. This will switch the remote controller to the Setup mode. (Wait 3 seconds.) w CH OK VOL q CD DVD CD-R/MD DSS T V VCR AUX L D TUNER TAPE AMP CLEAR MEMO AUTO DOLBY THX 123 GUIDE DTS 4 MUTE HALL 5 - Marantz RC1200 | User Guide - Page 38
• Adjust time interval between transmissions of macro operations (MACRO) • LCD lighting duration adjustment (LIGHT) VER: Switches the type of preset codes contained in the remote controller . LCD A displays VER, while LCD B displays either USA or REST. USA means that the CDR/MD Function button , is - Marantz RC1200 | User Guide - Page 39
of 0.5 seconds, allowing intervals of up to 5 seconds to be set. The remote controller is set at the factory with an interval of 1 second, as indicated by (77&&&&&&&&). Adjust the interval between transmission of operation codes using the < and > Cursor buttons ⁄0, then press the OK Cursor button - Marantz RC1200 | User Guide - Page 40
commands. These commands can be used with various Marantz A/V components, or other components using the Philips RC-5 remote control language (without DSS function). You can easily replace the factory-supplied remote command codes with different codes from other brands of component. Most of the - Marantz RC1200 | User Guide - Page 41
ENGLISH Function Command Note TV 1 A/CH alternate channel 2 100S 100's 3 VIDEO selects video 4 INFO information 5 S-PIC smart picture 6 S-SUD smart sound 7 S-CH smart channel 8 ADV advance 9 OSD activates on-screen display 0 MENU menu CD 1 DISC+ CD changer next disc 2 DISC- CD - Marantz RC1200 | User Guide - Page 42
ENGLISH Function DSS/V2 AUX DVD Command 1 DISP 2 PREV 3 SELCT 4 AUDIO 5 FAV 6 ALT 7 FTCH 8ANT 9 REC 0 OTR 1 No 2 No 3 No 4 No 5 No 6 No 7 No 8 No 9 No 0 No 1 OSD 2 TITLE 3 ZOOM 4 MENU 5 10+ 6 SETUP 7 ANGLE 8 SUB-T 9 RESUM 0 AUDIO Note brings up on-screen channel marker goes to previously selected - Marantz RC1200 | User Guide - Page 43
ENGLISH For REST setups Function Command MD 1 REC 2 REPT 3 RANDM 4 DISP 5 EDIT 6 EJECT 7 LP 8 DEL 9 ENTER 0 SYNC Note records pause selects repeat mode random play selects display mode selects edit mode eject selects SP/LP mode selects delete selects enter SYNCRO. recording - Marantz RC1200 | User Guide - Page 44
remote control Learning and transmission-capable infrared carrier frequency band 20 to 70 kHz Transmission infrared wavelength band ...... 950+/-45nm Maximum number of programmable codes warranty (for USA only 1 User guide 1 Note: Depending on the types of codes programmed, it may not be possible - Marantz RC1200 | User Guide - Page 45
v ⁄9 m ⁄2 ⁄6 ⁄5 ⁄8 POWER SOURCE ON ON / OFF OFF LEARNING REMOTE CONTROL RC 1200 MACRO MODE ENT ENT CH OK VOL CD DVD CD-R/MD DSS TV VCR AUX L D TUNER TAPE AMP CLEAR MEMO AUTO DOLBY THX 123 MATRIX MOVIE 2CH 6 78 GUIDE DTS 4 OSD 9 MUTE HALL 5 SLEEP 0 c z x b n ⁄0 . , ⁄4 ⁄3 ⁄1 - Marantz RC1200 | User Guide - Page 46
- Marantz RC1200 | User Guide - Page 47
Theater Systems, Inc. © 1996 Digital Theater Systems, Inc. All rights reserved. Lucasfilm and THX are registered trademark of Lucas film Ltd. R is a registered trademark. www.marantz.com Printed in Japan 00/02 287W851250 (MITi)
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
 |
 |
Model
R
RC1200
User Guide
Learning
Remote Control