Marantz SR4120 SR4120 User Manual - Page 7

ENGLISH LOCATION AND FUNCTION OF PARTS AND CONTROLS Front panel Features q STANDBY indicator This indicator lights up when in the standby mode. w F/P (frequency or preset number) button This use the display mode to select the frequency or preset number display. e P.SCAN button This button is used to automatically scan the tuner's preset stations. When pressed, the tuner starts scanning the preset stations. r MEMO (Memory) button Press this button to memorize the desired station frequency. t FM MODE button Press this button to select stereo or monaural mode, when listening to FM broadcasts. y Input selectors button These buttons select the audio source. The selected source name will be displayed on Fluorescent display. u Tuning / preset UP and DOWN knob During AM or FM reception, you can scan to other frequencies or preset number by adjust knob. i VOLUME CONTROL knob Adjust the sound volume with this control knob. Pre-out can also do control. o POWER switch When this switch is pressed once, the power turns ON and display appear on the display panel. When pressed again, the power turns OFF. After initialization or resetting, press this switch to enter the standby mode. To turn the power ON, press any of the function buttons of the main unit or the POWER button of the remote control unit. !0 PHONES socket for stereo headphones This jack is compatible with a wide range of conventional dynamic headphone types. !1 SPEAKERS (system 1 or 2) buttons Use these buttons to select speaker system 1 or 2, or both. !2 BASS CONTROL knob Adjust the low frequency level with this control according to your taste and room acoustics. !3 TREBLE CONTROL knob Adjust the high frequency level with this control according to your taste and room acoustics. !4 BALANCE CONTROL knob Adjust the sound volume between left and right speakers with this control knob. !5 Display a STEREO indicator This indicator lights up, when in FM stereo mode. b TUNED indicator This indicator lights up, when a broadcast is received properly. c TAPE MONITOR indicator This indicator lights up, when in TAPE MONITOR Mode. d PRESET indicator This indicator lights up, when in preset display Mode. e MEMORY indicator When the MEMO (memory) button is pressed, this indicator lights up for about 5 seconds. f PRESET NUMBER, DISPLAY Shows the selected preset number. g FREQUENCY/CHARACTER DISPLAY This display's the selected station frequency or the corresponding words when selecting a program source. 7