Marantz SR7008 Owner's Manual in English - Page 164

Contents Connections Playback 22Center Width Distributes the dialogue output from the center channel to left and right channels and widens the sound image in the front. 0 - 7 (Default : 3) % • You can set this when the sound mode is Dolby PLg/gx in the "Music" mode. • The smaller the value, the more dialogue is concentrated on the center channel. The larger the value, the more dialogue is distributed to front left and right channels, and the more the sound image widens in the front. 22Height Gain Control the front height channel volume. Low : R educe the front height channel volume. Normal (Default) : Front height channel sound is output with standard sound volume. High : Increase the front height channel volume. % • You can set this in the "PLgz" sound mode or when using the PLgz decoder. Settings Tips Appendix 22Speaker Select Makes settings for the speakers outputting sound. Surround Back : Sound is output from the surround back speakers. Height : Sound is output from the front height speakers. Wide : Sound is output from the front wide speakers. Back/Height : Sound is output from the surround back and front height speakers. Back/Wide : Sound is output from the surround back and front wide speakers. Height/Wide : Sound is output from the front height and front wide speakers. % • This can be set when "Assign Mode" (vpage 192) is set to "9.1ch(SB/FH/ FW)", "7.1ch + ZONE2", "7.1ch(Bi-Amp)" or "7.1ch + Front B". • The speakers that can be selected by the "Main Speakers" (vpage 193) setting are changed. • You can set this when the sound mode is "MULTI CH STEREO" or "NEO:X". 22Set Defaults The "Surround Parameter" settings are returned to the default settings. Front panel Display Rear panel 164 Remote Index