Maytag MBF2254HEW Use and Care Guide - Page 12

Touch Temperature, Controls

Page 12 highlights

Touch Temperature Controls (sdect mode s} The controls are located at the top front of the refrigerator compartment. Control initial Control Settings After plugging the refrigerator in, set the controls. Pressing the _ or _ to the desired setting. pads adjusts the controls The temperature control range for both compartments is 1 through 7 (coldest]. Set the freezer control on a. Set the refrigerator control on 4. Let the refrigerator run at least 8 to 12 hours before adding food. Warm Cabinet Surfaces At times, the front of the refrigerator cabinet may be warm to the touch. This is a normal occurrence that helps prevent moisture from condensing on the cabinet. This condition will be more noticeable when you first start the refrigerator, during hot weather and after excessive or lengthy door openings. Adjusting the Controls 24 hours after adding food, you may decide that one or both compartments should be colder or warmer. If so, adjust the control(s} as indicated in the Temperature Control Guide table below. See page 18 for instructions on checking compartment temperature. Except when starting the refrigerator, do not change either control more than one number at a time. Allow 2/4 hours for temperatures to stabilize. Temperature Controm Guide Refrigerator too warm Set the refrigerator control to next higher number by pressing the _ pad. Refrigerator too cold Set the refrigerator control to next lower number by pressing the _ pad. Freezer too warm Set the freezer control to i next higher number by Freezer too cold Set the freezer control to next lower number by pressing the pad. Turn refrigerator OFF Press the refrigerator or freezer '_,*pad until a dash (-} appears in the display. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

Touch Temperature
Controls
(sdect
mode s}
The controls
are located
at the top front
of the
refrigerator
compartment.
Control
initial
Control
Settings
After
plugging
the refrigerator
in,
set the controls.
Pressing
the
_
or
_
pads adjusts
the controls
to the desired
setting.
The temperature
control
range
for both
compartments
is 1 through
7 (coldest].
Set the freezer
control
on a.
Set the refrigerator
control
on 4.
Let the refrigerator
run at least 8 to
12 hours
before
adding
food.
Warm
Cabinet
Surfaces
At times,
the front
of the refrigerator
cabinet
may be
warm
to the touch. This is a normal
occurrence
that
helps prevent
moisture
from
condensing
on the
cabinet.
This condition
will
be more
noticeable
when
you first start
the refrigerator,
during
hot weather
and
after
excessive or lengthy
door
openings.
Adjusting
the
Controls
24 hours after adding
food, you may decide that
one
or both compartments
should
be colder
or warmer.
If
so, adjust
the control(s}
as indicated
in the
Temperature
Control
Guide
table
below.
See page 18
for instructions
on checking
compartment
temperature.
Except when
starting
the refrigerator,
do not change
either
control
more than
one number
at a time.
Allow
2/4 hours
for temperatures
to stabilize.
Temperature
Controm
Guide
Refrigerator
too
warm
Refrigerator
too
cold
Freezer
too
warm
Freezer
too
cold
Turn refrigerator
OFF
Set
the refrigerator
control
to
next higher
number
by
pressing
the _
pad.
Set
the refrigerator
control
to
next lower
number
by
pressing
the _
pad.
Set the freezer
control
to
i next higher
number
by
Set
the freezer
control
to
next lower
number
by
pressing
the
pad.
Press the refrigerator
or
freezer
'_,*pad until
a dash
(-}
appears
in the display.
11