Maytag MBF2254HEW Use and Care Guide - Page 6

Pullout Freezer Drawer (sdect modds) To Unstall: I 1. Pull both rails out to full extension. 2. While supporting door front, hook supports into tabs located on inside of rail. 3, Lower door front into final position. To Remove: 1. Pu[[ drawer open to fuji extension. 2. Pu[[ upper basket out to fuji extension and lift out to remove. . Lift lower basket straight up and out to remove. /4. On each side rail is a basket cradle with two snap attachments. To release each cradle, unlatch the snaps by pushing them inward, away from the side rail system. Lift the cradles off of the rails. 5. Remove Phillips screw from each side of rail system (select models}. 6, Lift top of drawer front to unhook supports from rail system. Lift door front out to remove. Replace and tighten Phillips screws that were removed from each side of rail system (select models}. Place the basket cradles back onto the side rails. Align snaps with the slots on the side rails and press each snap towards the rail until it clicks. With rails pulled out to full extension, set the basket straight down into the basket cradles. Basket cradle Z Slide upper basket into freezer. Make sure that rear of basket hooks behind rail catch,