Maytag MDB7949SDZ Use & Care Guide - Page 11
Removable Upper Rack, Style A, Style B, Style C
View all Maytag MDB7949SDZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Removable Upper Rack The removable rack allows you to wash larger items such as stock pots, roasters, and cookie sheets in the lower level rack. IMPORTANT: Remove dishes prior to removing the upper rack from the dishwasher. Style A To remove the rack: 1. Roll the rack 1/3 to 1/2 of the way out of the tub. 2. Rotate the rack stops outward. 3. Roll the rack all the way out of the track and remove from the dishwasher. To replace the rack: Reverse the above steps 1-3 to replace the rack into the dishwasher. Style B To remove the rack: 1. To gain access to the removable tabs on the tracks/rails, pull the upper rack forward about halfway out of the tub. 2. On one side, press the tab on the track in and pull the front end of the rack up and out of the track. Then repeat this step on the other side to completely remove the front end of the rack. 3. Remove the rack by pulling the back end out using a forward and upward motion. To replace the rack: 1. Pull the tracks forward about halfway out of the tub. 2. Along the sides of the racks are round attachment tabs. Align the rack's back end attachment tabs with the cutout in the track. Push down into place. 3. Pull the tracks completely out and align the rack's front end attachment tabs with the cutout in the track. Push down into place. You will hear a snap when the front end of the rack is secured into place on each side. Style C To remove the rack: 1. To gain access to the track stops, pull the upper rack forward about halfway out of the tub. 2. Press on the edge of the ridged area on the track stop while tipping the track stop toward the center of the dishwasher. This action releases a small retaining tab that locks the track stop to the track (see Track stop - left). NOTE: It is helpful to use 2 hands. Take special note of the orientation of the track stops 3. With the retaining tab released pull the track stop straight toward the opposite track to remove it. 4. After removing both track stops, carefully pull the top rack out of the tracks by rolling it toward you. 5. Replace the track stops by coming up from under the track and slipping the track stop into the lower slot of the track (see Track stop - right) and rotate the track stop into place. Then press on the edge of the ridged area while pushing the track stop straight toward the track. This action locks the retaining tab back into place. 6. Test the track stop by pulling it toward the opposite track to ensure that it is locked in place. Track stop - left Track stop - right To replace the rack: 1. Gently pull the tracks forward in dishwasher until they stop. Remove track stops. (See steps 1-3 above.) 2. Place the back wheels on each side of the rack into the track and roll the rack into the tracks, but do not push the rack all the way into the tub. 3. Insert front rack wheels on each side of the rack into the track. 4. Slide the rack into the dishwasher. 5. Replace the track stops by coming up from under the track and slipping the track stop into the lower slot of the track (see Track stop - right) and rotate the track stop into place. Then press on the edge of the ridged area while pushing the track stop straight toward the track. This action locks the retaining tab back into place. 6. Test the track stop by pulling it toward the opposite track to ensure that it is locked in place. IMPORTANT: Be sure that the track stops are locked in place and cannot be easily removed. They keep the rack from coming out of the track. 11