Maytag MER6741BAS Use and Care Guide - Page 12
Cook & Hold
UPC - 719881172071
View all Maytag MER6741BAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
6. Check cooking progress. Cook longer if needed. 7. When cooking is finished, press CANCEL. (/CA, NCEL%) 8. Remove food from the oven. Notes: * To change the oven temperature during cooking, press the Bake pad and then the More+ or Less= pad until the desired temperature is displayed. * To change the even temperature during preheat, press the Bake pad twice, then press the More+ or Less= pads until the desired temperature is displayed. * If you forget to turn off the oven, it will automatically shut off at the end of 12 hours. If you wish to deactivate this feature, see page 13. Baking Differences Between Your Old and New Oven It is normal to notice some baking time differences between a new oven and an old one. See Adjusting the Oven Temperature on page 13. When the cooking time has elapsed: " Four beeps will sound. BAKE will turn off. HOLD and WARM will light. 170° will display. After one hour in HOLD WARM: ', "End" will display. * The time of day reappears in the display. To cancel Cook & Hold at any time: LL/_I_LEL/ Press the CANCEL pad. Remove food from oven. Delay Bake Cook & Hold Cook & Hold allows you to bake for a preset amount of time, followed by a one-hour Keep Warm cycle. To set Cook & Hold: 1. Press the Cook & Hold pad. When using Delay, the oven begins to cook later in the day. Set the amount of time that you want to delay before the oven turns on and how long you want to cook. The oven begins to heat at the selected time and cooks for the specified length of ', BAKE and HOLD flash. time, then keeps food warm for up to one hour. 999 lights in the display. : More+ Delay time can be set from 10 minutes (99:19) to 11 hours, 59 minutes (11:59). 2. Select the oven temperature. The oven temperature can be set from 170° to 559°. Press T...o....s..e...t...a....D...e..l.a...y..e..d... Baking cycle: or press and hold the More+ or Less= pad. Less- 1. Press the Delay pad. , Press the More+ pad to increase the temperature. ,, DELAY flashes. * Press the Less= pad to decrease the temperature. * 99:99 appears in the display. 3. Press Cook & Hold again OR wait four seconds. 2. Press the More+ or Less= pad to set the * HOLD flashes. delay time. / * 99:99 flashes in the display. 4. Enter the amount of time you want to bake by pressing the More+ or Less= pad. Bake time can be set from ten While DELAY is still flashing: 3. Press the Cook & Hold pad. * 999 lights in the display. minutes (99:19)to 11 hours, 59 minutes (11:59). * BAKE and HOLD flash. * BAKE and HOLD light in the display. * The baking time will light in the display. * The baking time will start counting down. 4. Press More+ pad to set the baking temperature. * 99:99 and HOLD flash. * BAKE stays lit. 11