Maytag MEW9527DS Use & Care Guide - Page 6

Clock To Set the Clock: Before setting, make sure the oven(s) and Timer are off. 1. Press CLOCK and "CLOCK" appears in the text area. 2. Press the Temp/Time keypad to enter the desired time. The text area will change to "Press START." 3. Press START. "Time Set" will appear in the text area. Once the display clears, the time is set. Timer The Timer can be set in hours or minutes up to 9 hours and 59 minutes, and counts down the set time. The Timer does not start or stop the oven. To Set: 1. Press TIMER SET/OFF. "Set TIMER" will scroll down in the text display area, and the clock will display "--:--". 2. Press the Temp/Time keypad to enter the desired Timer. "Press TIMER" will scroll down in the text display area. 3. Press TIMER SET/OFF to start the timer. The time begins counting down. "TIMER Started" will scroll down in the text display area. The last minute of the timer countdown will be displayed in seconds. At the end of the set time, 4 tones will sound, and "TIMER End" will be displayed. 4. Press TIMER SET/OFF to clear the display. NOTE: A reminder beep will sound until the Timer is canceled. To Cancel: Press TIMER SET/OFF. Settings Fahrenheit and Celsius The temperature is factory preset to Fahrenheit but can be changed to Celsius. 1. Press SETTINGS once. "TEMP UNIT" and "FAHRENHEIT. Press (1) for CELSIUS" will appear in the display text area. 2. Press the Temp/Time "1" keypad to change the temperature unit. 3. "CELSIUS Selected" will scroll in the text area. The temperature unit has been changed. NOTE: A similar procedure can be done to return the temperature unit to Fahrenheit. Tones Tones are audible signals, indicating the following: Basic Functions One tone ■ Valid pad press ■ Function has been entered ■ Oven is preheated Three tones ■ Invalid pad press Four tones ■ End of cycle ■ End of Kitchen Timer Adjusting Sound On or Off The oven sound is factory preset for On but can be changed to Off. 1. Press SETTINGS twice. "SOUND" and "ON. Press (1) for OFF" will appear in the display text area. 2. Press the Temp/Time "1" keypad to change the sound setting. 3. "OFF Selected" will scroll in the text area. The sound setting has been changed. NOTE: A similar procedure can be done to return the sound setting to On. Adjusting Sound Volume The oven sound is factory preset for High but can be changed to Low. 1. Press SETTINGS three times. "SOUND VOLUME" and "HIGH. Press (1) for LOW" will appear in the display text area. 2. Press the Temp/Time "1" keypad to change the sound volume setting. 3. "LOW Selected" will scroll in the text area. The sound volume setting has been changed. NOTE: A similar procedure can be done to return the sound volume setting to High. Adjusting End Tone On or Off The end tone is factory preset for On but can be changed to Off. 1. Press SETTINGS four times. "END TONE" and "ON. Press (1) to OFF" will appear in the display text area. 2. Press the Temp/Time "1" pad to change the end tone setting. 3. "OFF Selected" will scroll in the text area. The end tone setting has been changed. NOTE: A similar procedure can be done to return the end tone setting to On. Adjusting Keypress Tone On or Off The keypress tone is factory set for On but can be changed to Off. 1. Press SETTINGS five times. "KEYPRESS TONE" and "ON. Press (1) to OFF" will appear in the display text area. 2. Press the Temp/Time "1" pad to change the keypress tone setting. 3. "OFF Selected" will scroll in the text area. The keypress tone setting has been changed. NOTE: A similar procedure can be done to return the keypress tone setting to ON. Adjusting Reminder Tone On or Off The reminder tone is factory preset for On but can be changed to Off. 1. Press SETTINGS six times. "REMINDER TONE" and "ON. Press (1) to OFF" will appear in the display text area. 2. Press the Temp/Time "1" pad to change the reminder tone setting. 3. "OFF Selected" will scroll in the text area. The reminder tone setting has been changed. NOTE: A similar procedure can be done to return the reminder tone setting to ON. 6