Maytag MGD3100DW Installation Guide - Page 16
Move the door strike, Remove inner door from outer door, Remove outer window assembly, from trim
View all Maytag MGD3100DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
2. Move the door strike 4. Remove outer window assembly from trim ring Using a TORX T25® screwdriver, remove the 2 screws securing the door strike to the door frame of the dryer. Rotate the strike 180° and attach to the opposite side of dryer door frame, as shown. 3. Remove inner door from outer door Fig. A Fig. B Using a Phillips screwdriver, remove the 2 screws from the outer window retainer and rotate the outer window assembly clockwise until the square notches line up with the 4 tabs on the trim ring indicated with arrows in the figure A above. Then lift out the outer window and retainer up and off the trim ring and set aside (B). Position the door with the inside of the door facing up. Using a Phillips screwdriver, remove the 10 screws securing the inner door to the outer door. Lift off the inner door and set aside. 16