Maytag MGD3100DW Installation Guide - Page 18
Reinstall hinge and latch on, opposite sides, Remove hinge and latch, Reinstall inner door assembly
View all Maytag MGD3100DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
7. Remove hinge and latch Latch 9. Reinstall inner door assembly Bottom of door Hinge Using a TORX T25® screwdriver, remove the 3 TORX® screws securing the latch plate and latch backing plate and the 5 screws holding the hinge assembly in place. 8. R einstall hinge and latch on opposite sides Position the door with the inside of the door facing up. Reinstall the 10 screws securing the inner door to the outer door. 10. Reinstall door on dryer Using a TORX T25® screwdriver, reinstall the latch plate, latch backing plate, and hinge assembly on the opposite sides from which they were removed. Using a TORX T25® screwdriver, remove the 4 screws on the dryer. Insert the tabs on the hinge into the mounting slot and slide down to engage the top tab. Secure in place with the 4 TORX T25® screws removed earlier. 18