Maytag MGT3800TW User Instructions - Page 5

5= Turn the WATER LEVEL selector to the correct setting for your wash load and the type of fabric being washed. You may change the load size or water level selection after the washer has started filling by turning the selector to a different setting. 6= Set the TEMPERATURE selector to the correct setting for the type of fabric and soils being washed, Use the warmest water safe for fabric. Follow garment label instructions, NOTE: In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well. Soils can be difficult to remove. Some fabrics can retain wear wrinkles and have increased pilling (the formation of small lint-like balls on the surface of garments). 7. Push in the Cycle Control knob and turn it clockwise to the wash cycle you want. Reduce the wash time when using a small load size setting. Pull out the Cycle Control knob to start the washer. To stop or restart your washer: • To stop the washer at any time, push in the Cycle Control knob. • To restart the washer, close the lid (if open) and pull out the Cycle Control knob, DRYER USE Explosion Hazard Keep flammable materials and vapors, such as gasoline, away from dryer. Do not dry anything that has ever had anything flammable on it (even after washing). Failure to follow these instructions can result in death, explosion, or fire. Fire Hazard No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). items containing foam, rubber, or plastic must be dried on a clothesline or by using an Air Cycle. Failure to follow these instructions can result in death or fire. Before using your dryer, wipe the dryer drum with a damp cloth to remove dust from storing and shipping. f. Clean lint screen before each load. See "Cleaning the Lint Screen," 2. Load clothes loosely into the dryer and close the door. Do not pack the dryer. Allow space for clothes to tumble freely. 3. Turn the Cycle Control knob to the recommended cycle for the type of load being dried. Use the Energy Preferred Automatic Setting to dry most heavy to medium weight fabrics. 4. (OPTIONAL) Your dryer may have an END OF CYCLE SIGNAL. The signal is helpful when drying items that should be removed from the dryer as soon as it stops, The End of Cycle signal is part of the Start button and is selectable, Turn the Start button to ON or OFR The signal will sound only if the selector is set to On. 5. If desired, add fabric softener sheet, Follow package instructions. 6. Press the PUSH TO START button. Stopping and Restarting You can stop your dryer anytime during a cycle. To stop your dryer Open the dryer door or turn the Cycle Control knob to OFE NOTE: The Cycle Control knob should point to an Off area when the dryer is not in use. To restart your dryer Close the door. Select a new cycle and temperature (if desired). Press the PUSH TO START button.