Maytag MMV1175 Installation Instructions - Page 5

6. Using diagonal wire cutting pliers, gently snip out the rectangular damper vent covers at the perforations. 10. Reattach the two blower screws into the recessed holes in the back of the microwave. A B A. Diagonal wire cutting pliers B. Rectangular damper vent cover 7. Hold the blower motor wire, put the wire through the blower motor bridge. A B A B A. Screws B. Recessed holes 11. Check to make sure the two screws are secured properly in the blower motor screw holes, so that the motor cannot move. A. Blower motor bridge B. Blower motor wire 8. Lower blower motor back into the microwave oven. Exhaust ports face the back of the microwave oven. A A. Exhaust Port 9. Reconnect the blower motor wire into the connector. A B A B A. Screws B. Blower motor screw holes 12. Return the damper plate to its original horizontal position. A A. Blower motor wire B. Connector A. Damper plate 5