Maytag MRT311FFFZ Use & Care Guide - Page 7
Reverse Center Hinge, Reverse Freezer Door, Reverse Refrigerator Door
View all Maytag MRT311FFFZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Reverse Doors (optional) See complete graphics later in these instructions. Door Hinge Hole Plug Cabinet Hinge Hole Plug Setscrew Door Stop Screw Dome Cap Dome Cap Washer Shoulder Screw Flat-Head Handle Screw Shoulder Screw Washer Door Handle Hole Plug Reverse Center Hinge 1. Remove the three dome caps and screws from the handle side and use them to fill the holes created when the hinge screws were removed. A B C Reverse Freezer Door 1. Remove the three cabinet hole plugs from the top of the cabinet and place them in the hinge holes on the opposite side. A A. Cabinet hole plugs 2. Remove the door stop from the bottom of the freezer door. AB A. Door stop screw B. Door stop 3. Move the door stop to the opposite side, making sure that the hole in the door stop plate is aligned perfectly with the hole for the center hinge pin. 4. Using the screw removed in Step 2, fasten the door stop to the bottom of the freezer door. A A. Dome cap washers B hex-head hinge screws C. Dome caps 2. Using the three hex-head hinge screws removed in Step 1, insert two screws halfway into the holes, leaving space to insert the center hinge. 3. Slide the center hinge (from the right) onto the screws, insert the third screw, and then tighten all screws completely. NOTE: Make sure the washers are in place on both the top and bottom pins of the center hinge. A. Door stop screw Reverse Refrigerator Door 1. Remove door hinge hole plug from refrigerator door. Move to opposite side hinge hole. 2. Remove the door stop from the bottom of the refrigerator door. A B A A hex-head hinge screws B. Washers AB A. Door stop screw B. Door stop 7