Miele CVA 7845 Operating and Installation instructions - Page 97
setting has been acti, on even though
View all Miele CVA 7845 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Frequently Asked Questions Problem Possible cause and solution Coffee dispensing is repeatedly interrupted and the message Fill the bean container appears in the display. This is not a fault. The brew unit has not detected the ground coffee. Certain types of coffee produce a small amount of coffee when they are ground. Usually the grinder is set too fine and the amount is set to minimum. Confirm the message with OK. If the display appears with all types of coffee: Set the grinder to a coarser setting (see "Grinder setting"). Select a larger amount of coffee. Don't forget to check any drinks changed in "User profiles". If the message only appears when dispensing certain drinks: Check the amount of coffee set for this drink (see "Amount of coffee"). Select a larger amount of coffee. You may also need to set a coarser grinder setting. The coffee machine The system lock is activated. does not switch itself Deactivate the system lock. on even though the On at setting has been acti- The current day of the week has not been selected. vated for the timer. Check the timer settings and change these if necessary. The coffee machine was not used after being switched on automatically three times in succession (vacation mode). Switch the machine on and dispense a drink. The coffee machine does not switch on with the On at timer while automatic descaling is being carried out. This is not a fault. Select a different timer setting. Steam is dispensed instead of water while preparing hot water or making tea. It is likely that the wrong altitude has been set. Change the altitude settings (Settings Altitude). If necessary, you can also change the temperature settings for the drinks (Drinks parameters). 97