Motorola 549478-001-00 User Guide - Page 29

Managing the Wireless WallPlates Configuring a WLAN Four steps are required to enable a WLAN and start broadcasting: Step1: Create a profile to contain the SSID and per-SSID parameters wifi wlan profile add ex: wifi wlan profile add My_WLAN Step2: Bind the profile to a WLAN wifi wlan config profile ex: wifi wlan config wlan(1-25)-1 profile My_WLAN Step3: Enable the WLAN wifi wlan enable ex: wifi wlan enable wlan(1-25)-1 Step4: Enable the Radio interface wireless enable ex: interface wireless enable radio(1-25) Global Radio Commands Use the following commands to Configure Global radio parameters: Command interface wireless enable/disable Interface wireless config interface wireless wmm interface wireless mode interface wireless name interface wireless country What it does Enable the radio or disable the radio Channel: 1-11 Transmit power: 1-14, max (in dBm) Preamble: Auto, Long RTS-Threshold: 0-2347 Short Retry Limit: 1-255 Long Retry Limit: 1-255 Fragmentation: 256-2346 Mcast Rate Limit: 0-1000 Spectralink QoS: enable/disable Data Rate: 1, 2 ... 54, Auto Max Client Association: 1-64 Beacon Period: 100-1000 (ms) Global WMM parameters for each radio Set the mode to B, G, or B and G Assign a friendly name to the radio Select the operating country Motorola, Inc. 570510-001-00 rev A Page 29 of 50