Motorola HS810 User Manual - Page 9

Using Your Headset Function Device Status Action Phone Headset Hands Free Profile Headset Profile Put Active On-in call On Long press E N/A Call On Hold Receive a Call On-phone On rings Short press E (call Press E (call is is answered) answered) Reject a Call On-phone On Long press E N/A rings Answer 2nd On-in call, On incoming call 2nd call coming in Long press E, N/A places 1st call on hold, answers incoming call Toggle On-in call, On Long press E N/A between two 2nd call on active calls hold Transfer call On-in call On from phone to Headset Short press E, (call Press E (call transferred to transferred to headset) headset) Note: If the link is abnormally disconnected (e.g., out of range) the headset tries to reestablish the link. 16 Using Your Headset Using Your Headset Indicators Headset Indicator (LED) With charger plugged in: Headset Indicator ON OFF Headset charging in progress charging complete With no charger attached: Headset Indicator OFF Headset power off ON (steady) pairing mode 10 rapid flashes pairing successful flashes at a 3-second interval standby (not on a call) (.1 seconds ON 2.9 seconds OFF) pulses at an 8-second interval connected (on a call) (2.0 seconds ON, 6.0 seconds OFF) Note: When the wireless headset is paired to the phone and there is no activity for 5 minutes, the blue flashing LED turns off. Any button press on the headset will reawaken the headset and the flashing resumes. If you press the up and down volume buttons simultaneously during a call, the pulsing LED turns off for the duration of that call. 17