Motorola iDEN Series User Guide - Page 24
Setting the Ringer Volume, Selecting a Ring Style, Setting a Ring Style for the Alternate Line
View all Motorola iDEN Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
6. Select "Exit" to return to the Vibrate Alert menu. 7. Select "Exit" again to return to the previous mode. s Df b Group/Prvt Vibe:Off Setting the Ringer Volume Exit On You can adjust the ringer volume for incoming calls. If you have a second phone line, you must set each line separately. Be sure to select the desired line before setting the volume. 1. Press *, #, 3, 0. The "30=Ringer Vol- ume" screen displays. s Df b The display shows your current ringer volume. 2. Press the Volume Control buttons on the side of the 30=Ringer Volume phone to listen as you raise or lower the volume. At Exit the lowest setting, the screen displays "Volume Silent". 3. When you reach the desired level, select "Exit". Selecting a Ring Style Your phone has nine selectable ring styles. Phones with two phone lines can use the same or different ring styles for each phone line. Incoming circuit data calls have a unique, preset ring style which you cannot change. Setting a Ring Style 1. Press *, #, 3, 1. 1. The display shows your current ring style. 2. Select "Ok". 3. Press Q to scroll through the available Ring Styles. 4. To listen to the selected ring style, press the Volume buttons on the side of the phone. 5. Select "Ok" to select the Ring Style shown. s Df b 31=Set Ring Style:1 Exit Ok s Df b Ring Style 4 Cancl Ok To leave the ring style unchanged, select "Cancl" 6. Select "Exit". Setting a Ring Style for the Alternate Line 1. From the Phone Ready screen, press M until you see "Line2". 2. Select "Line2". 3. Repeat the procedure for "Setting a Ring Style", above. www.mot.com/iDEN 24