Motorola iDEN Series User Guide - Page 58
Charging a battery, Data Operation
View all Motorola iDEN Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Desktop Dual-Pocket Charger The NTN1690 Desktop Dual-Pocket Charger charges Motorola authorized batteries, as listed on Page 55, for the i700plus phone. NOTE: The Desktop Dual-Pocket Charger should only be powered by the included Rapid Power Supply. The Charger will flash both LEDs red if the Standard Travel Charger is attached. Rear pocket LED indicators Front pocket Pin connector Power supply cord receptacle (DC jack) Data cable receptacle Figure 3. Desktop Dual-Pocket Charger Charging a battery: 1. Insert the power supply's DC jack plug into the DC jack receptacle on the back of the Charger. Use only with the Motorola rapid charger included with your Desktop Charger package. 2. Plug the power supply end of the power-supply cord into any standard AC outlet. The Charger performs a quick power-up self-test during which both LED indicators flash green once to indicate a successful power-up. 3. Attach a battery to your i700plus phone. Place the i700plus phone onto the pin connector located in the charger's front pocket. Data Operation 1. Insert the round end of the iDEN Data Cable (NKN6522) into the data cable receptacle located on the back of the charger, with the Motorola logo facing upwards. 2. Connect the opposite end of the data cable to the PC. NOTE: Charging times may vary when performing data operations. www.mot.com/iDEN 58