NEC 50XC10 42XC10 50XC10 60XC10 user's manual - Page 18

English On-Screen Display (OSD) Main Menu PICTURE Sub Menu Sub Menu2 PICTURE MEMORY CONTRAST BRIGHTNESS SHARPNESS COLOR TINT NR COLOR TEMP. WHITE BALANCE. GAIN RED GAIN GREEN GAIN BLUE RESET FILM MODE PICTURE MODE GAMMA Available only when the Advanced OSD function in the FUNCTION menu is enabled. SET UP LEVEL Available only when the Advanced OSD function in the FUNCTION menu is enabled. COLOR CONTROL Available only when the Advanced OSD function in the FUNCTION menu is enabled. RED GREEN BLUE YELLOW MAGENTA CYAN RESET Explanation Store picture menu settings and input terminal information. The memory number is 1-6. The "PICTURE MEMORY" screen appears when the SET button is pressed on the "PICTURE MEMORY" MENU. Adjusts the image brightness in relationship to the white level. Press + or - to adjust. Adjusts the image brightness in relationship to the background. Press + or - to adjust. Adjusts the crispness of the image. Press + or - to adjust. Adjusts the color depth of the screen. Press + or - to adjust. Adjusts the tint of the screen. Press + or - to adjust. Adjusts the amount of noise reduction. Press + or - to adjust. Adjusts the color temperature of the entire screen. A low color temperature will make the screen reddish. A high color temperature will make the screen bluish. The "WHITE BALANCE" appears when the SET button is pressed on the "COLOR TEMP." OSD menu. GAIN RED/GREEN/BLUE: Adjusts the white level of the white balance. Resets the factory default settings. Select "ON", then press the SET button to reset. Selects Film mode. Selects picture mode, [BRIGHT], [STANDARD], [CINEMA1], [CINEMA2], [DEFAULT]. STANDARD: For watching in a bright room. CINEMA1, 2: For watching in a dark room, especially good for movies. BRIGHT: Brighter picture than STANDARD. DEFAULT: Restores factory default settings. Select a display gamma for best picture quality. 2.1, 2.2, 2.3, 2.4: The picture becomes darker as the number increases. S: Special gamma for certain types of movies. Raises the dark parts and lowers the light parts of the image. (S-Curve) These values are approximate. Adjusts the video black level. VIDEO signal input only. Adjusts the levels of the Red, Green, Blue, Yellow, Magenta and Cyan. VIDEO and DVD/HD 1/2 input only. Resets the factory default settings. Select "ON", then press the SET button to reset. Default OFF 50 50 50 50 50 OFF MIDDLE 50 50 50 OFF ON STANDARD 2.2 0% 50 50 50 50 50 50 OFF Reset YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES English-15