NEC AS193i-BK Users Manual - Page 13

Specifications

Page 13 highlights

English Specifications Monitor Specifications AccuSync AS172 Monitor LCD Module Diagonal: 43.3 cm/17 inches Viewable Image Size: 43.3 cm/17 inches Native Resolution (Pixel Count): 1280 x 1024 Input Signal Display Colors Viewing Angle 15pin Mini D-sub: Analog RGB Sync DVI-D Digital RGB 16,777,216 Left/Right: -85°/+85° (CR>10) Up/Down: -80°/+80° (CR>10) Notes Active matrix, thin film transistor (TFT) liquid crystal display (LCD); 0.264 mm dot pitch; 250 cd/m2 white luminance, 1000:1 contrast ratio, typical. 0.7 Vp-p/75 ohms Separate sync. TTL level (Positive/Negative) DVI(HDCP) Depends on display card used. Synchronization Range Horizontal: 31.5 kHz to 81.1 kHz Vertical: 56 Hz to 76 Hz Resolutions Supported Landscape: 720 x 400*1: VGA text 640 x 480*1 at 60 Hz to 75 Hz 800 x 600*1 at 56 Hz to 75 Hz 832 x 624*1 at 75 Hz 1024 x 768*1 at 60 Hz to 75 Hz 1152 x 864*1 at 75 Hz 1152 x 870*1 at 75 Hz 1280 x 960*1 at 60 Hz to 75 Hz 1280 x 1024 at 60 Hz to 75 Hz Active Display Area Horizontal: 337.9 mm Vertical: 270.3 mm Automatically Automatically Some systems may not support all modes listed. Recommended resolution is 60 Hz for optimal display performance. Power Supply 100 - 240 V ~ 50/60 Hz Current Rating 0.40 - 0.20 A Power Consumption Maximun Operation: 14 W Normal Operation: 11 W Dimensions Landscape: 373.2 mm (W) x 373.1 mm (H) x 205.1 mm (D) 14.7 inches (W) x 14.7 inches (H) x 8.1 inches (D) Weight 3.3 kg (7.3 lbs) Environmental Considerations Operating Temperature: 5°C to 35°C/41°F to 95°F Humidity: 20% to 80% Altitude: 0 to 2,000 m/0 to 6,562 Feet Storage Temperature: -10°C to 60°C/14°F to 140°F Humidity: 10% to 85% Altitude: 0 to 12,192 m/0 to 40,000 Feet *1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done. NOTE: Technical specifications are subject to change without notice. English-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

English
English-11
Specifications
Monitor Specifications
AccuSync AS172 Monitor
Notes
LCD Module
Diagonal:
43.3 cm/17 inches
Active matrix, thin film transistor (TFT)
liquid crystal display (LCD); 0.264 mm dot
pitch; 250 cd/m
2
white luminance, 1000:1
contrast ratio, typical.
Viewable Image Size:
43.3 cm/17 inches
Native Resolution (Pixel Count):
1280 x 1024
Input Signal
15pin Mini D-sub:
Analog RGB
0.7 Vp-p/75 ohms
Sync
Separate sync. TTL level (Positive/Negative)
DVI-D
Digital RGB
DVI(HDCP)
Display Colors
16,777,216
Depends on display card used.
Viewing Angle
Left/Right:
-85°/+85° (CR>10)
Up/Down:
-80°/+80° (CR>10)
Synchronization Range
Horizontal:
31.5 kHz to 81.1 kHz
Automatically
Vertical:
56 Hz to 76 Hz
Automatically
Resolutions Supported
Landscape:
720 x 400*
1
: VGA text
640 x 480*
1
at 60 Hz to 75 Hz
800 x 600*
1
at 56 Hz to 75 Hz
832 x 624*
1
at 75 Hz
1024 x 768*
1
at 60 Hz to 75 Hz
1152 x 864*
1
at 75 Hz
1152 x 870*
1
at 75 Hz
Some systems may not support all modes
listed.
1280 x 960*
1
at 60 Hz to 75 Hz
1280 x 1024 at 60 Hz to 75 Hz
.................
Recommended resolution is 60 Hz for
optimal display performance.
Active Display Area
Horizontal:
337.9 mm
Vertical:
270.3 mm
Power Supply
100 - 240 V ~ 50/60 Hz
Current Rating
0.40 - 0.20 A
Power
Maximun Operation:
14 W
Consumption
Normal Operation:
11 W
Dimensions
Landscape:
373.2 mm (W) x 373.1 mm (H) x 205.1 mm (D)
14.7 inches (W) x 14.7 inches (H) x 8.1 inches (D)
Weight
3.3 kg (7.3 lbs)
Environmental Considerations
Operating Temperature:
Humidity:
Altitude:
Storage Temperature:
Humidity:
Altitude:
5°C to 35°C/41°F to 95°F
20% to 80%
0 to 2,000 m/0 to 6,562 Feet
-10°C to 60°C/14°F to 140°F
10% to 85%
0 to 12,192 m/0 to 40,000 Feet
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal
and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen
is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE:
Technical specifications are subject to change without notice.